Re: [PATCH v2 3/3] ARM: dts: stm32: Fix DT dtc warnings for stm32f4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 7, 2018 at 6:55 AM <patrice.chotard@xxxxxx> wrote:
>
> From: Patrice Chotard <patrice.chotard@xxxxxx>
>
> Fix the following DT dtc warnings for stm32f429 and
> stm32f469 boards:
>
> Warning (node_name_chars_strict): /soc/pin-controller/usbotg_fs@0: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /soc/pin-controller/usbotg_fs@1: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /soc/pin-controller/usbotg_hs@0: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /soc/pin-controller/sdio_pins@0: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /soc/pin-controller/sdio_pins_od@0: Character '_' not recommended in node name
> Warning (node_name_chars_strict): /gpio_keys: Character '_' not recommended in node name
> Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name
> Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name
> Warning (unit_address_vs_reg): /soc/pin-controller/usart1@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/usart3@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/usbotg_fs@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/usbotg_fs@1: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/usbotg_hs@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/mii@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/adc@200: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/pwm@1: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/pwm@3: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/i2c1@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/ltdc@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/dcmi@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/sdio_pins@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /soc/pin-controller/sdio_pins_od@0: node has a unit name, but no reg property
> Warning (unit_address_vs_reg): /gpio_keys/button@0: node has a unit name, but no reg property
> Warning (avoid_unnecessary_addr_size): /gpio_keys: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
>
> Signed-off-by: Patrice Chotard <patrice.chotard@xxxxxx>
> ---
> Change since v1:
>         - update nodes name as following: <node_name>@0 to <node_name>-0
>
>
>  arch/arm/boot/dts/stm32429i-eval.dts     | 11 +++--
>  arch/arm/boot/dts/stm32f4-pinctrl.dtsi   | 30 ++++++-------
>  arch/arm/boot/dts/stm32f429-disco.dts    |  7 ++-
>  arch/arm/boot/dts/stm32f429-pinctrl.dtsi | 74 +++++++++++++++----------------
>  arch/arm/boot/dts/stm32f429.dtsi         |  8 ++--
>  arch/arm/boot/dts/stm32f469-disco.dts    | 11 +++--
>  arch/arm/boot/dts/stm32f469-pinctrl.dtsi | 76 +++++++++++++++-----------------
>  7 files changed, 102 insertions(+), 115 deletions(-)
>
> diff --git a/arch/arm/boot/dts/stm32429i-eval.dts b/arch/arm/boot/dts/stm32429i-eval.dts
> index 7eb786a2d624..116232b589e4 100644
> --- a/arch/arm/boot/dts/stm32429i-eval.dts
> +++ b/arch/arm/boot/dts/stm32429i-eval.dts
> @@ -60,7 +60,7 @@
>                 stdout-path = "serial0:115200n8";
>         };
>
> -       memory {
> +       memory@0 {
>                 reg = <0x00000000 0x2000000>;
>         };
>
> @@ -111,17 +111,16 @@
>                 };
>         };
>
> -       gpio_keys {
> +       gpio-keys {
>                 compatible = "gpio-keys";
> -               #address-cells = <1>;
>                 #size-cells = <0>;

Think you forgot this line.

>                 autorepeat;
> -               button@0 {
> +               button-0 {
>                         label = "Wake up";
>                         linux,code = <KEY_WAKEUP>;
>                         gpios = <&gpioa 0 0>;
>                 };
> -               button@1 {
> +               button-1 {
>                         label = "Tamper";
>                         linux,code = <KEY_RESTART>;
>                         gpios = <&gpioc 13 0>;
> @@ -145,7 +144,7 @@
>                 };
>         };
>
> -       mmc_vcard: mmc_vcard {
> +       mmc_vcard: mmc-vcard {
>                 compatible = "regulator-fixed";
>                 regulator-name = "mmc_vcard";
>                 regulator-min-microvolt = <3300000>;
> diff --git a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
> index 35202896c093..244c7ab8c76d 100644
> --- a/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/stm32f4-pinctrl.dtsi
> @@ -45,7 +45,7 @@
>
>  / {
>         soc {
> -               pinctrl: pin-controller {
> +               pinctrl: pin-controller@40020000 {

pinctrl is the documented node name, not pin-controller.

>                         #address-cells = <1>;
>                         #size-cells = <1>;
>                         ranges = <0 0x40020000 0x3000>;
> @@ -163,7 +163,7 @@
>                                 st,bank-name = "GPIOK";
>                         };
>
> -                       usart1_pins_a: usart1@0 {
> +                       usart1_pins_a: usart1-0 {

What's wrong with just "usart1"?

I think I would like to see "-pins" appended to the node names.

>                                 pins1 {
>                                         pinmux = <STM32_PINMUX('A', 9, AF7)>; /* USART1_TX */
>                                         bias-disable;
> @@ -176,7 +176,7 @@
>                                 };
>                         };
>
> -                       usart3_pins_a: usart3@0 {
> +                       usart3_pins_a: usart3-0 {
>                                 pins1 {
>                                         pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
>                                         bias-disable;
> @@ -189,7 +189,7 @@
>                                 };
>                         };
>
> -                       usbotg_fs_pins_a: usbotg_fs@0 {
> +                       usbotg_fs_pins_a: usbotg-fs-0 {
>                                 pins {
>                                         pinmux = <STM32_PINMUX('A', 10, AF10)>, /* OTG_FS_ID */
>                                                  <STM32_PINMUX('A', 11, AF10)>, /* OTG_FS_DM */
> @@ -200,7 +200,7 @@
>                                 };
>                         };
>
> -                       usbotg_fs_pins_b: usbotg_fs@1 {
> +                       usbotg_fs_pins_b: usbotg-fs-1 {
>                                 pins {
>                                         pinmux = <STM32_PINMUX('B', 12, AF12)>, /* OTG_HS_ID */
>                                                  <STM32_PINMUX('B', 14, AF12)>, /* OTG_HS_DM */
> @@ -211,7 +211,7 @@
>                                 };
>                         };
>
> -                       usbotg_hs_pins_a: usbotg_hs@0 {
> +                       usbotg_hs_pins_a: usbotg-hs-0 {
>                                 pins {
>                                         pinmux = <STM32_PINMUX('H', 4, AF10)>, /* OTG_HS_ULPI_NXT*/
>                                                  <STM32_PINMUX('I', 11, AF10)>, /* OTG_HS_ULPI_DIR */
> @@ -231,7 +231,7 @@
>                                 };
>                         };
>
> -                       ethernet_mii: mii@0 {
> +                       ethernet_mii: mii-0 {
>                                 pins {
>                                         pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_MII_TXD0_ETH_RMII_TXD0 */
>                                                  <STM32_PINMUX('G', 14, AF11)>, /* ETH_MII_TXD1_ETH_RMII_TXD1 */
> @@ -251,13 +251,13 @@
>                                 };
>                         };
>
> -                       adc3_in8_pin: adc@200 {
> +                       adc3_in8_pin: adc-0 {
>                                 pins {
>                                         pinmux = <STM32_PINMUX('F', 10, ANALOG)>;
>                                 };
>                         };
>
> -                       pwm1_pins: pwm@1 {
> +                       pwm1_pins: pwm-1 {

You have a mixture of the number suffix being a pin mode # and block
instance #. pwm1 or pwm1-pins?

Similar comments on the rest.

Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux