With the fast DMA bit set, the DMA will transfer twice as much data per clock period to the AIC, so there is little point not to set it. Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx> Reviewed-by: PrasannaKumar Muralidharan <prasannatsmkumar@xxxxxxxxx> --- drivers/dma/dma-jz4780.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) v2: No change v3: No change v4: No change diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c index 565971c2a33c..3a4d0a4b550d 100644 --- a/drivers/dma/dma-jz4780.c +++ b/drivers/dma/dma-jz4780.c @@ -52,6 +52,7 @@ #define JZ_DMA_DMAC_DMAE BIT(0) #define JZ_DMA_DMAC_AR BIT(2) #define JZ_DMA_DMAC_HLT BIT(3) +#define JZ_DMA_DMAC_FAIC BIT(27) #define JZ_DMA_DMAC_FMSC BIT(31) #define JZ_DMA_DRT_AUTO 0x8 @@ -923,8 +924,8 @@ static int jz4780_dma_probe(struct platform_device *pdev) * Also set the FMSC bit - it increases MSC performance, so it makes * little sense not to enable it. */ - jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, - JZ_DMA_DMAC_DMAE | JZ_DMA_DMAC_FMSC); + jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMAC, JZ_DMA_DMAC_DMAE | + JZ_DMA_DMAC_FAIC | JZ_DMA_DMAC_FMSC); if (soc_data->flags & JZ_SOC_DATA_PROGRAMMABLE_DMA) jz4780_dma_ctrl_writel(jzdma, JZ_DMA_REG_DMACP, 0); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
