Jacek Thanks for the review. On 08/04/2018 07:14 AM, Jacek Anaszewski wrote: > Hi Dan, > > Thank you for the patch. Please find my comments below. > > On 08/03/2018 05:02 PM, Dan Murphy wrote: >> Introduce the lm3697 LED driver for >> backlighting and display. >> >> Datasheet location: >> http://www.ti.com/lit/ds/symlink/lm3697.pdf >> >> Signed-off-by: Dan Murphy <dmurphy@xxxxxx> >> --- >> drivers/leds/Kconfig | 9 + >> drivers/leds/Makefile | 1 + >> drivers/leds/leds-lm3697.c | 375 +++++++++++++++++++++++++++++++++++++ >> 3 files changed, 385 insertions(+) >> create mode 100644 drivers/leds/leds-lm3697.c >> >> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig >> index 6e3a998f3370..efa8be180934 100644 >> --- a/drivers/leds/Kconfig >> +++ b/drivers/leds/Kconfig >> @@ -150,6 +150,15 @@ config LEDS_LM3642 >> converter plus 1.5A constant current driver for a high-current >> white LED. >> >> +config LEDS_LM3697 >> + tristate "LED support for LM3697 Chip" >> + depends on LEDS_CLASS && I2C >> + select REGMAP_I2C >> + help >> + This option enables support for LEDs connected to LM3697. >> + The LM3697 is an 11 bit high performance backlight driver for >> + keypad and display lighting. >> + >> config LEDS_LM3692X >> tristate "LED support for LM3692x Chips" >> depends on LEDS_CLASS && I2C && OF >> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile >> index 420b5d2cfa62..2813f089f3db 100644 >> --- a/drivers/leds/Makefile >> +++ b/drivers/leds/Makefile >> @@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o >> obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o >> obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o >> obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o >> +obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o >> obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o >> obj-$(CONFIG_LEDS_S3C24XX) += leds-s3c24xx.o >> obj-$(CONFIG_LEDS_NET48XX) += leds-net48xx.o >> diff --git a/drivers/leds/leds-lm3697.c b/drivers/leds/leds-lm3697.c >> new file mode 100644 >> index 000000000000..332bde4af01a >> --- /dev/null >> +++ b/drivers/leds/leds-lm3697.c >> @@ -0,0 +1,375 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +// TI LM3697 LED chip family driver >> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ >> + >> +#include <linux/gpio/consumer.h> >> +#include <linux/i2c.h> >> +#include <linux/init.h> >> +#include <linux/leds.h> >> +#include <linux/module.h> >> +#include <linux/mutex.h> >> +#include <linux/of.h> >> +#include <linux/of_gpio.h> >> +#include <linux/regmap.h> >> +#include <linux/regulator/consumer.h> >> +#include <linux/slab.h> >> +#include <uapi/linux/uleds.h> >> + >> +#define LM3697_REV 0x0 >> +#define LM3697_RESET 0x1 >> +#define LM3697_OUTPUT_CONFIG 0x10 >> +#define LM3697_CTRL_A_RAMP 0x11 >> +#define LM3697_CTRL_B_RAMP 0x12 >> +#define LM3697_CTRL_A_B_RT_RAMP 0x13 >> +#define LM3697_CTRL_A_B_RAMP_CFG 0x14 >> +#define LM3697_CTRL_A_B_BRT_CFG 0x16 >> +#define LM3697_CTRL_A_FS_CURR_CFG 0x17 >> +#define LM3697_CTRL_B_FS_CURR_CFG 0x18 >> +#define LM3697_PWM_CFG 0x1c >> +#define LM3697_CTRL_A_BRT_LSB 0x20 >> +#define LM3697_CTRL_A_BRT_MSB 0x21 >> +#define LM3697_CTRL_B_BRT_LSB 0x22 >> +#define LM3697_CTRL_B_BRT_MSB 0x23 >> +#define LM3697_CTRL_ENABLE 0x24 >> + >> +#define LM3697_SW_RESET BIT(0) >> + >> +#define LM3697_CTRL_A_EN BIT(0) >> +#define LM3697_CTRL_B_EN BIT(1) >> +#define LM3697_CTRL_A_B_EN (LM3697_CTRL_A_EN | LM3697_CTRL_B_EN) >> + >> +#define LM3697_CONTROL_A 0 >> +#define LM3697_CONTROL_B 1 >> + >> +#define LM3697_HVLED1_2_3_A 0 >> +#define LM3697_HVLED1_B_HVLED2_3_A 1 >> +#define LM3697_HVLED2_B_HVLED1_3_A 2 >> +#define LM3697_HVLED1_2_B_HVLED3_A 3 >> +#define LM3697_HVLED3_B_HVLED1_2_A 4 >> +#define LM3697_HVLED1_3_B_HVLED2_A 5 >> +#define LM3697_HVLED1_A_HVLED2_3_B 6 >> +#define LM3697_HVLED1_2_3_B 7 >> + >> +/** >> + * struct lm3697_led - >> + * @led_dev - LED class device pointer > > This is not a pointer but static struct property, > i.e. it should be "LED class device". Ack > >> + * @priv - Pointer to the device struct >> + * @control_bank - Control bank the LED is associated to. 0 is control bank A >> + * 1 is control bank B. >> + * @label - LED label >> + */ >> +struct lm3697_led { >> + struct led_classdev led_dev; >> + struct lm3697 *priv; >> + int control_bank; >> + char label[LED_MAX_NAME_SIZE]; >> +}; >> + >> +/** >> + * struct lm3697 - >> + * @lock - Lock for reading/writing the device >> + * @client - Pointer to the I2C client >> + * @dev - Pointer to the devices device struct >> + * @regmap - Devices register map >> + * @enable_gpio - Hardware enable gpio >> + * @regulator - LED supply regulator pointer >> + * @control_bank_config - Control bank configuration >> + * @leds - Array of LED strings. >> + */ >> +struct lm3697 { >> + struct mutex lock; >> + struct i2c_client *client; >> + struct device *dev; >> + struct regmap *regmap; >> + struct gpio_desc *enable_gpio; >> + struct regulator *regulator; >> + int control_bank_config; >> + struct lm3697_led leds[]; >> +}; >> + >> +static const struct reg_default lm3697_reg_defs[] = { >> + {LM3697_OUTPUT_CONFIG, 0x6}, >> + {LM3697_CTRL_A_RAMP, 0x0}, >> + {LM3697_CTRL_B_RAMP, 0x0}, >> + {LM3697_CTRL_A_B_RT_RAMP, 0x0}, >> + {LM3697_CTRL_A_B_RAMP_CFG, 0x0}, >> + {LM3697_CTRL_A_B_BRT_CFG, 0x0}, >> + {LM3697_CTRL_A_FS_CURR_CFG, 0x13}, >> + {LM3697_CTRL_B_FS_CURR_CFG, 0x13}, >> + {LM3697_PWM_CFG, 0xc}, >> + {LM3697_CTRL_A_BRT_LSB, 0x0}, >> + {LM3697_CTRL_A_BRT_MSB, 0x0}, >> + {LM3697_CTRL_B_BRT_LSB, 0x0}, >> + {LM3697_CTRL_B_BRT_MSB, 0x0}, >> + {LM3697_CTRL_ENABLE, 0x0}, >> +}; >> + >> +static const struct regmap_config lm3697_regmap_config = { >> + .reg_bits = 8, >> + .val_bits = 8, >> + >> + .max_register = LM3697_CTRL_ENABLE, >> + .reg_defaults = lm3697_reg_defs, >> + .num_reg_defaults = ARRAY_SIZE(lm3697_reg_defs), >> + .cache_type = REGCACHE_RBTREE, >> +}; >> + >> +static int lm3697_brightness_set(struct led_classdev *led_cdev, >> + enum led_brightness brt_val) >> +{ >> + struct lm3697_led *led = container_of(led_cdev, struct lm3697_led, >> + led_dev); >> + int brt_msb_reg, brt_lsb_reg, ctrl_en_val; >> + int led_brightness_lsb = (brt_val >> 5); >> + int ret; >> + >> + mutex_lock(&led->priv->lock); >> + >> + if (led->control_bank == LM3697_CONTROL_A) { >> + brt_msb_reg = LM3697_CTRL_A_BRT_MSB; >> + brt_lsb_reg = LM3697_CTRL_A_BRT_LSB; >> + ctrl_en_val = LM3697_CTRL_A_EN; >> + } else { >> + brt_msb_reg = LM3697_CTRL_B_BRT_MSB; >> + brt_lsb_reg = LM3697_CTRL_B_BRT_LSB; >> + ctrl_en_val = LM3697_CTRL_B_EN; >> + } >> + >> + if (brt_val == LED_OFF) >> + ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE, >> + ctrl_en_val, ~ctrl_en_val); >> + else >> + ret = regmap_update_bits(led->priv->regmap, LM3697_CTRL_ENABLE, >> + ctrl_en_val, ctrl_en_val); >> + > > checkpatch.pl reports trailing whitespace here. Hmm. I will fix it but I did run cp. Must be a change I made after running it. > >> + if (ret) { >> + dev_err(&led->priv->client->dev, "Cannot write CTRL enable\n"); >> + goto out; >> + } >> +> + ret = regmap_write(led->priv->regmap, brt_lsb_reg, led_brightness_lsb); >> + if (ret) { >> + dev_err(&led->priv->client->dev, "Cannot write LSB\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(led->priv->regmap, brt_msb_reg, brt_val); >> + if (ret) { >> + dev_err(&led->priv->client->dev, "Cannot write MSB\n"); >> + goto out; >> + } >> +out: >> + mutex_unlock(&led->priv->lock); >> + return ret; >> +} >> + >> +static int lm3697_init(struct lm3697 *priv) >> +{ >> + int ret; >> + >> + if (priv->enable_gpio) >> + gpiod_direction_output(priv->enable_gpio, 1); >> + else >> + regmap_write(priv->regmap, LM3697_RESET, LM3697_SW_RESET); >> + >> + ret = regmap_write(priv->regmap, LM3697_OUTPUT_CONFIG, >> + priv->control_bank_config); >> + if (ret) { >> + dev_err(&priv->client->dev, "Cannot write MSB\n"); >> + goto out; >> + } >> + >> + ret = regmap_write(priv->regmap, LM3697_CTRL_ENABLE, 0x0); >> + if (ret) { >> + dev_err(&priv->client->dev, "Cannot write LSB\n"); >> + goto out; >> + } >> + >> +out: >> + return ret; >> +} >> + >> +static int lm3697_probe_dt(struct lm3697 *priv) >> +{ >> + struct fwnode_handle *child = NULL; >> + struct fwnode_handle *fwnode; >> + struct device_node *np; >> + struct lm3697_led *led; >> + const char *name; >> + size_t i = 0; >> + int ret; >> + >> + priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev, >> + "enable", GPIOD_OUT_LOW); >> + if (IS_ERR(priv->enable_gpio)) { >> + ret = PTR_ERR(priv->enable_gpio); >> + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", >> + ret); >> + return ret; >> + } >> + >> + priv->regulator = devm_regulator_get(&priv->client->dev, "vled"); >> + if (IS_ERR(priv->regulator)) >> + priv->regulator = NULL; >> + >> + fwnode = of_fwnode_handle(priv->client->dev.of_node); > > To remain OF agnostic here, you could use > dev_fwnode(&priv->client->dev) here. Ack > >> + ret = fwnode_property_read_u32(fwnode, "control-bank-cfg", >> + &priv->control_bank_config); >> + if (ret) { >> + dev_err(&priv->client->dev, "reg DT property missing\n"); >> + goto out; >> + } >> + >> + if (priv->control_bank_config < LM3697_HVLED1_2_3_A || >> + priv->control_bank_config > LM3697_HVLED1_2_3_B) { >> + dev_err(&priv->client->dev, "Control bank configuration is \ >> + out of range\n"); >> + ret = -EINVAL; >> + goto out; >> + } >> + > > Please remove one empty line here. Ack > >> + >> + device_for_each_child_node(priv->dev, child) { >> + np = to_of_node(child); > > This is not needed really. Ack > >> + led = &priv->leds[i]; >> + >> + ret = fwnode_property_read_u32(child, "reg", &led->control_bank); >> + if (ret) { >> + dev_err(&priv->client->dev, "reg DT property missing\n"); >> + goto child_out; >> + } >> + >> + fwnode_property_read_string(child, "linux,default-trigger", >> + &led->led_dev.default_trigger); >> + >> + ret = fwnode_property_read_string(child, "label", &name); >> + if (ret) >> + snprintf(led->label, sizeof(led->label), >> + "%s::", priv->client->name); >> + else >> + snprintf(led->label, sizeof(led->label), >> + "%s:%s", priv->client->name, name); >> + >> + >> + led->priv = priv; >> + led->led_dev.name = led->label; >> + led->led_dev.brightness_set_blocking = lm3697_brightness_set; >> + >> + ret = devm_of_led_classdev_register(priv->dev, np, >> + &led->led_dev); > > Please use devm_led_classdev_register() wrapper. > devm_of_led_classdev_register() was introduced to enable parsing trigger > related DT properties, but the support hasn't been finalized. Ack > >> + if (ret) { >> + dev_err(&priv->client->dev, "led register err: %d\n", ret); >> + goto child_out; >> + } >> + >> + led->led_dev.dev->of_node = to_of_node(child); > > of_led_classdev_register() does this assignment already, but you don't > need it either way. Ack > >> + >> + if (priv->control_bank_config == LM3697_HVLED1_2_3_A || >> + priv->control_bank_config == LM3697_HVLED1_2_3_B) >> + goto child_out; >> + >> + i++; >> + fwnode_handle_put(child); >> + } >> + >> +child_out: >> + fwnode_handle_put(child); >> +out: >> + return ret; >> +} >> + >> +static int lm3697_probe(struct i2c_client *client, >> + const struct i2c_device_id *id) >> +{ >> + struct lm3697 *led; >> + int count; >> + int ret; >> + >> + count = device_get_child_node_count(&client->dev); >> + if (!count) { >> + dev_err(&client->dev, "LEDs are not defined in device tree!"); >> + return -ENODEV; >> + } >> + >> + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), GFP_KERNEL); >> + if (!led) >> + return -ENOMEM; >> + >> + mutex_init(&led->lock); >> + i2c_set_clientdata(client, led); >> + >> + led->client = client; >> + led->dev = &client->dev; >> + led->regmap = devm_regmap_init_i2c(client, &lm3697_regmap_config); >> + if (IS_ERR(led->regmap)) { >> + ret = PTR_ERR(led->regmap); >> + dev_err(&client->dev, "Failed to allocate register map: %d\n", >> + ret); >> + return ret; >> + } >> + >> + ret = lm3697_probe_dt(led); >> + if (ret) >> + return ret; >> + >> + ret = lm3697_init(led); >> + if (ret) >> + return ret; >> + >> + return ret; >> +} >> + >> +static int lm3697_remove(struct i2c_client *client) >> +{ >> + struct lm3697 *led = i2c_get_clientdata(client); >> + int ret; >> + >> + ret = regmap_update_bits(led->regmap, LM3697_CTRL_ENABLE, >> + LM3697_CTRL_A_B_EN, 0); >> + if (ret) { >> + dev_err(&led->client->dev, "Failed to disable regulator\n"); >> + return ret; >> + } >> + >> + if (led->enable_gpio) >> + gpiod_direction_output(led->enable_gpio, 0); >> + >> + if (led->regulator) { >> + ret = regulator_disable(led->regulator); >> + if (ret) >> + dev_err(&led->client->dev, >> + "Failed to disable regulator\n"); >> + } >> + >> + mutex_destroy(&led->lock); >> + >> + return 0; >> +} >> + >> +static const struct i2c_device_id lm3697_id[] = { >> + { "lm3697", 0 }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(i2c, lm3697_id); >> + >> +static const struct of_device_id of_lm3697_leds_match[] = { >> + { .compatible = "ti,lm3697", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, of_lm3697_leds_match); >> + >> +static struct i2c_driver lm3697_driver = { >> + .driver = { >> + .name = "lm3697", >> + .of_match_table = of_lm3697_leds_match, >> + }, >> + .probe = lm3697_probe, >> + .remove = lm3697_remove, >> + .id_table = lm3697_id, >> +}; >> +module_i2c_driver(lm3697_driver); >> + >> +MODULE_DESCRIPTION("Texas Instruments LM3697 LED driver"); >> +MODULE_AUTHOR("Dan Murphy <dmurphy@xxxxxx>"); >> +MODULE_LICENSE("GPL v2"); >> > -- ------------------ Dan Murphy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
