Re: [PATCH v2 03/18] dt-bindings: clk: Add documentation of grx500 clock controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 2, 2018 at 9:03 PM Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx> wrote:
>
> From: Yixin Zhu <yixin.zhu@xxxxxxxxxxxxxxx>
>
> This patch adds binding documentation for grx500 clock controller.
>
> Signed-off-by: YiXin Zhu <yixin.zhu@xxxxxxxxxxxxxxx>
> Signed-off-by: Songjun Wu <songjun.wu@xxxxxxxxxxxxxxx>
> ---
>
> Changes in v2:
> - Rewrite clock driver's dt-binding document according to Rob Herring's
>   comments.
> - Simplify device tree docoment, remove some clock description.
>
>  .../devicetree/bindings/clock/intel,grx500-clk.txt | 39 ++++++++++++++++++++++

Please match the compatible string: intel,grx500-cgu.txt

>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
> new file mode 100644
> index 000000000000..e54e1dad9196
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/intel,grx500-clk.txt
> @@ -0,0 +1,39 @@
> +Device Tree Clock bindings for grx500 PLL controller.
> +
> +This binding uses the common clock binding:
> +       Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +The grx500 clock controller supplies clock to various controllers within the
> +SoC.
> +
> +Required properties for clock node
> +- compatible: Should be "intel,grx500-cgu".
> +- reg: physical base address of the controller and length of memory range.
> +- #clock-cells: should be 1.
> +
> +Optional Propteries:
> +- intel,osc-frequency: frequency of the osc clock.
> +if missing, driver will use clock rate defined in the driver.

This should use a fixed-clock node instead.

> +
> +Example: Clock controller node:
> +
> +       cgu: cgu@16200000 {
> +                compatible = "intel,grx500-cgu", "syscon";
> +               reg = <0x16200000 0x200>;
> +               #clock-cells = <1>;
> +       };
> +
> +
> +Example: UART controller node that consumes the clock generated by clock
> +       controller.
> +
> +       asc0: serial@16600000 {
> +               compatible = "lantiq,asc";
> +               reg = <0x16600000 0x100000>;
> +               interrupt-parent = <&gic>;
> +               interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
> +                       <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
> +                       <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
> +               clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
> +               clock-names = "freq", "asc";
> +       };
> --
> 2.11.0
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux