On 26.07.2018 17:37, Christoph Hellwig wrote:
> From: Palmer Dabbelt <palmer@xxxxxxxxxxx>
>
> This patch adds documentation for the platform-level interrupt
> controller (PLIC) found in all RISC-V systems. This interrupt
> controller routes interrupts from all the devices in the system to each
> hart-local interrupt controller.
>
> Note: the DTS bindings for the PLIC aren't set in stone yet, as we might
> want to change how we're specifying holes in the hart list.
>
> Signed-off-by: Palmer Dabbelt <palmer@xxxxxxxxxxx>
> ---
> .../interrupt-controller/riscv,plic0.txt | 55 +++++++++++++++++++
> 1 file changed, 55 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/interrupt-controller/riscv,plic0.txt
>
> diff --git a/Documentation/devicetree/bindings/interrupt-controller/riscv,plic0.txt b/Documentation/devicetree/bindings/interrupt-controller/riscv,plic0.txt
> new file mode 100644
> index 000000000000..99cd359dbd43
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interrupt-controller/riscv,plic0.txt
> @@ -0,0 +1,55 @@
> +RISC-V Platform-Level Interrupt Controller (PLIC)
> +-------------------------------------------------
> +
> +The RISC-V supervisor ISA specification allows for the presence of a
> +platform-level interrupt controller (PLIC). The PLIC connects all external
> +interrupts in the system to all hart contexts in the system, via the external
> +interrupt source in each hart's hart-local interrupt controller (HLIC). A hart
> +context is a privilege mode in a hardware execution thread. For example, in
> +an 4 core system with 2-way SMT, you have 8 harts and probably at least two
> +privilege modes per hart; machine mode and supervisor mode.
> +
> +Each interrupt can be enabled on per-context basis. Any context can claim
> +a pending enabled interrupt and then release it once it has been handled.
> +
> +Each interrupt has a configurable priority. Higher priority interrupts are
> +serviced firs. Each context can specify a priority threshold. Interrupts
^^ missing 't'
> +with priority below this threshold will not cause the PLIC to raise its
> +interrupt line leading to the context.
> +
> +While the PLIC supports both edge-triggered and level-triggered interrupts,
> +interrupt handlers are oblivious to this distinction and therefor it is not
^^
missing 'e'
> +specific in the PLIC device-tree binding.
> +
> +While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
> +"riscv,plic0" device is a concrete implementation of the PLIC that contains a
> +specific memory layout. More details about the memory layout of the
> +"riscv,plic0" device can be found as a comment in the device driver, or as part
> +of the SiFive U5 Coreplex Series Manual (page 22 of the PDF of version 1.0)
> +<https://www.sifive.com/documentation/coreplex/u5-coreplex-series-manual/>
> +
> +Required properties:
> +- compatible : "riscv,plic0"
> +- #address-cells : should be <0>
> +- #interrupt-cells : should be <1>
> +- interrupt-controller : Identifies the node as an interrupt controller
> +- reg : Should contain 1 register range (address and length)
> +- interrupts-extended : Specifies which contexts are connected to the PLIC,
> + with "-1" specifying that a context is not present.
> +
> +Example:
> +
> + plic: interrupt-controller@c000000 {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + compatible = "riscv,plic0";
> + interrupt-controller;
> + interrupts-extended = <
> + &cpu0-intc 11
> + &cpu1-intc 11 &cpu1-intc 9
> + &cpu2-intc 11 &cpu2-intc 9
> + &cpu3-intc 11 &cpu3-intc 9
> + &cpu4-intc 11 &cpu4-intc 9>;
> + reg = <0xc000000 0x4000000>;
> + riscv,ndev = <10>;
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
