Use assigned-clock properties to configure pllc4 as the parent clock for sdmmc4 on Tegra210. pllc4 offers better jitter perfomance than the default pllp and is required by HS200 and HS400 modes. Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx> --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 0951acc..14da98a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1057,6 +1057,11 @@ nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>; nvidia,default-tap = <0x2>; nvidia,default-trim = <0x4>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>, + <&tegra_car TEGRA210_CLK_PLL_C4>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-rates = <200000000>, <1000000000>, <1000000000>; status = "disabled"; }; @@ -1107,6 +1112,9 @@ nvidia,pad-autocal-pull-down-offset-1v8 = <0x05>; nvidia,default-tap = <0x8>; nvidia,default-trim = <0x0>; + assigned-clocks = <&tegra_car TEGRA210_CLK_SDMMC4>, + <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; + assigned-clock-parents = <&tegra_car TEGRA210_CLK_PLL_C4_OUT0>; status = "disabled"; }; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
