Hi Mauro, On 18-07-31 16:56, Mauro Carvalho Chehab wrote: > Em Tue, 31 Jul 2018 15:30:56 +0200 > Marco Felsch <m.felsch@xxxxxxxxxxxxxx> escreveu: > > > Hi Javier, > > > > On 18-07-31 14:52, Javier Martinez Canillas wrote: > > > Hi Marco, > > > > > > On 07/31/2018 02:36 PM, Marco Felsch wrote: > > > > > > [snip] > > > > > > >> > > > >> Yes, another thing that patch 19/22 should take into account is DTs that > > > >> don't have input connectors defined. So probably TVP5150_PORT_YOUT should > > > >> be 0 instead of TVP5150_PORT_NUM - 1 as is the case in the current patch. > > > >> > > > >> In other words, it should work both when input connectors are defined in > > > >> the DT and when these are not defined and only an output port is defined. > > > > > > > > Yes, it would be a approach to map the output port dynamicaly to the > > > > highest port number. I tried to keep things easy by a static mapping. > > > > Maybe a follow up patch can change this behaviour. > > > > > > > > Anyway, input connectors aren't required. There must be at least one > > > > port child node with a correct port-number in the DT. > > > > > > > > > > Yes, that was my point. But your patch uses the port child reg property as > > > the index for the struct device_node *endpoints[TVP5150_PORT_NUM] array. > > > > > > If there's only one port child (for the output) then the DT binding says > > > that the reg property isn't required, so this will be 0 and your patch will > > > wrongly map it to TVP5150_PORT_AIP1A. That's why I said that the output port > > > should be the first one in your enum tvp5150_ports and not the last one. > > > > Yes, now I got you. I implemted this in such a way in my first apporach. > > But at the moment I don't know why I changed this. Maybe to keep the > > decoder->input number in sync with the em28xx devices, which will set the > > port by the s_routing() callback. > > > > Let me check this. I will prepare a follow up patch wich fix this behaviour, if possible. > > Anyway, with the patchset I sent (with one fix), it will do the right > thing with regards to the pad output: > https://git.linuxtv.org/mchehab/experimental.git/log/?h=tvp5150 Thanks for your work :) I have just one question. Is it correct to set the .sig_type only for the tvp5150 'main' entity or should it be set for the dynamical connector entities too? > > $ mc_nextgen_test -D > digraph board { > rankdir=TB > colorscheme=x11 > labelloc="t" > label="Grabster AV 350 > driver:em28xx, bus: usb-0000:00:14.0-2 > " > intf_devnode_7 [label="intf_devnode_7\nvideo\n/dev/video0", shape=box, style=filled, fillcolor=yellow] > intf_devnode_10 [label="intf_devnode_10\nvbi\n/dev/vbi0", shape=box, style=filled, fillcolor=yellow] > entity_1 [label="{{<pad_2> 0 | <pad_3> 1 | <pad_4> 2} | entity_1\nATV decoder\ntvp5150 0-005c | {<pad_5> 3}}", shape=Mrecord, style=filled, fillcolor=lightblue] > entity_6 [label="{{<pad_12> 0} | entity_6\nV4L I/O\n2-2:1.0 video}", shape=Mrecord, style=filled, fillcolor=aquamarine] > entity_9 [label="{{<pad_13> 0} | entity_9\nVBI I/O\n2-2:1.0 vbi}", shape=Mrecord, style=filled, fillcolor=aquamarine] > entity_14 [label="{entity_14\nunknown entity type\nComposite | {<pad_15> 0}}", shape=Mrecord, style=filled, fillcolor=cadetblue] > entity_16 [label="{entity_16\nunknown entity type\nS-Video | {<pad_17> 0}}", shape=Mrecord, style=filled, fillcolor=cadetblue] > intf_devnode_7 -> entity_6 [dir="none" color="orange"] > intf_devnode_10 -> entity_9 [dir="none" color="orange"] > entity_1:pad_5 -> entity_6:pad_12 [color=blue] > entity_1:pad_5 -> entity_9:pad_13 [color=blue] > entity_14:pad_15 -> entity_1:pad_2 [color=blue] > entity_16:pad_17 -> entity_1:pad_2 [color=blue style="dashed"] > } > > It won't do the right thing with regards to the input, though, as > the code at v4l2-mc.c expects just one input. So, both composite and > S-Video connectors (created outside tvp5150, based on the input entries > at em28xx cards table) are linked to pad 0. Should we add comment for this behaviour in v4l2-mc.c? Since the MEDIA_ENT_F_CONN_RF case updates the pad number. > > Thanks, > Mauro > Regards, Marco -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
