Hello. On 03/03/2014 07:44 PM, Felipe Balbi wrote:
Add support of the device tree probing for the Renesas R-Car generation 2 SoCs documenting the device tree binding as necessary.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Unless someone on devicetree@vger gives me an ACK pretty soon, I'm afraid this patch will miss v3.15.
Ugh, the USB acceptance window is getting very short...
--- This patch is against the 'next' branch of Felipe Balbi's 'usb.git' repo. Changes in version 2: - restored devm_clk_get() call and the error handling logic in the probe() method, removed clk_put() call in the remove() method.
Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt | 29 +++++++++++ drivers/usb/phy/phy-rcar-gen2-usb.c | 42 ++++++++++++++-- 2 files changed, 68 insertions(+), 3 deletions(-)
Index: usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt =================================================================== --- /dev/null +++ usb/Documentation/devicetree/bindings/usb/rcar-gen2-phy.txt @@ -0,0 +1,29 @@ +* Renesas R-Car generation 2 USB PHY + +This file provides information on what the device node for the R-Car generation +2 USB PHY contains. + +Required properties: +- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. + "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. +- reg: offset and length of the register block. +- clocks: clock phandle and specifier pair. +- clock-names: string, clock input name, must be "usbhs". + +Optional properties: +- renesas,channel0-pci: boolean, specify when USB channel 0 should be connected + to PCI EHCI/OHCI; otherwise, it will be connected to the + USBHS controller. +- renesas,channel2-pci: boolean, specify when USB channel 2 should be connected + to PCI EHCI/OHCI; otherwise, it will be connected to the + USBSS controller (xHCI).
I wonder if these two properties should be taken care by pinctrl framework instead.
No, the internal port multiplexing is controlled by the PHY itself, see the driver source. The same way it was with USB port 1 of the generation 1 R-Car SoCs.
WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
