On Tue, 2018-07-31 at 15:47 +0200, Alexandre Belloni wrote: > Switch to device_get_match_data in probe to match the device specific > data > instead of using the acpi specific function. > Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > Suggested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx> > --- > drivers/i2c/busses/i2c-designware-platdrv.c | 6 ++---- > 1 file changed, 2 insertions(+), 4 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c > b/drivers/i2c/busses/i2c-designware-platdrv.c > index ddf13527aaee..00bf62f77c47 100644 > --- a/drivers/i2c/busses/i2c-designware-platdrv.c > +++ b/drivers/i2c/busses/i2c-designware-platdrv.c > @@ -119,10 +119,6 @@ static int dw_i2c_acpi_configure(struct > platform_device *pdev) > break; > } > > - id = acpi_match_device(pdev->dev.driver->acpi_match_table, > &pdev->dev); > - if (id && id->driver_data) > - dev->flags |= (u32)id->driver_data; > - > if (acpi_bus_get_device(handle, &adev)) > return -ENODEV; > > @@ -269,6 +265,8 @@ static int dw_i2c_plat_probe(struct > platform_device *pdev) > else > i2c_parse_fw_timings(&pdev->dev, t, false); > > + dev->flags |= (u32)device_get_match_data(&pdev->dev); > + > acpi_speed = i2c_acpi_find_bus_speed(&pdev->dev); > /* > * Some DSTDs use a non standard speed, round down to the > lowest -- Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> Intel Finland Oy -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
