Describe interrupts property in more detail, especially when there are
more than one interrupt.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
.../devicetree/bindings/serial/renesas,sci-serial.txt | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index a7cda6550100..eaca9da79d83 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -73,7 +73,21 @@ Required properties:
family-specific and/or generic versions.
- reg: Base address and length of the I/O registers used by the UART.
- - interrupts: Must contain an interrupt-specifier for the SCIx interrupt.
+ - interrupts: Must contain one or more interrupt-specifiers for the SCIx.
+ If a single interrupt is expressed, then all events are
+ multiplexed into this single interrupt.
+
+ If multiple interrupts are provided by the hardware, the order
+ in which the interrupts are listed must match order below. Note
+ that some HW interrupt events may be muxed together resulting
+ in duplicate entries.
+ The interrupt order is as follows:
+ 1. Error (ERI)
+ 2. Receive buffer full (RXI)
+ 3. Transmit buffer empty (TXI)
+ 4. Break (BRI)
+ 5. Data Ready (DRI)
+ 6. Transmit End (TEI)
- clocks: Must contain a phandle and clock-specifier pair for each entry
in clock-names.
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
