Hi Tomi, Thank you for the patch. On Monday, 18 June 2018 16:22:36 EEST Tomi Valkeinen wrote: > Add DT bindings for Texas Instruments AM65x SoC Display Subsystem. The > DSS7 on AM65x SoC has two video ports (DPI and OLDI) and two video > pipelines. > > Signed-off-by: Jyri Sarha <jsarha@xxxxxx> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > --- > .../bindings/display/ti/ti,am6-dss.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/display/ti/ti,am6-dss.txt > > diff --git a/Documentation/devicetree/bindings/display/ti/ti,am6-dss.txt > b/Documentation/devicetree/bindings/display/ti/ti,am6-dss.txt new file mode > 100644 > index 000000000000..3466f095fb84 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/ti/ti,am6-dss.txt > @@ -0,0 +1,16 @@ > +Texas Instruments AM65x Display Subsystem > +========================================== > + > +Required properties: > +- compatible: "ti,am65x-dss", "ti,am6-dss" > +- reg: address and length of the register spaces for DSS submodules > +- reg-names: "common", "vidl1", "vid", "ovr1", "ovr2", "vp1", "vp2" > +- clocks: phandle to fclk, vp1, and vp2 clocks > +- clock-names: "fck", "vp1", "vp2" > +- interrupts: phandle to the DISPC interrupt > +- syscon: phandle to syscon device handling OLDI_PWRDN_TX (partition 1 of > + AM654 CTRL MMR0) > + > +The DSS outputs are described using the device graphs as documented in > +Documentation/devicetree/bindings/graph.txt. AM6 DSS has a DPI output as > port 0 > +and an OLDI output as port 1. Without documentation for the AM65x it's hard to review these DT bindings. However, my comment regarding the registers of the k2g-dss bindings applies here too. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
