On Fri, Jul 27, 2018 at 03:40:52PM -0700, Eduardo Valentin wrote:
> On Wed, Jul 25, 2018 at 06:12:28PM -0700, Matthias Kaehlcke wrote:
> > Hi Doug,
> >
> > On Wed, Jul 25, 2018 at 04:19:56PM -0700, Doug Anderson wrote:
> >
> > > On Tue, Jul 24, 2018 at 4:46 PM, Matthias Kaehlcke <mka@xxxxxxxxxxxx> wrote:
> > > > +static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
> > > > + int temp)
> > > > +{
> > > > + u8 reg;
> > > > + bool disable_s2_shutdown = false;
> > > > + int ret;
> > > > +
> > > > + WARN_ON(!mutex_is_locked(&chip->lock));
> > > > +
> > > > + /*
> > > > + * Default: S2 and S3 shutdown enabled, thresholds at
> > > > + * 105C/125C/145C, monitoring at 25Hz
> > > > + */
> > > > + reg = SHUTDOWN_CTRL1_RATE_25HZ;
> > > > +
> > > > + if ((temp == THERMAL_TEMP_INVALID) ||
> > > > + (temp < STAGE2_THRESHOLD_MIN)) {
> > > > + chip->thresh = THRESH_MIN;
> > > > + goto skip;
> > > > + }
> > > > +
> > > > + if (temp <= STAGE2_THRESHOLD_MAX) {
> > > > + chip->thresh = THRESH_MAX -
> > > > + ((STAGE2_THRESHOLD_MAX - temp) /
> > > > + TEMP_THRESH_STEP);
> > > > + disable_s2_shutdown = true;
> > > > + } else {
> > > > + chip->thresh = THRESH_MAX;
> > > > +
> > > > + if (!IS_ERR(chip->adc))
> > > > + disable_s2_shutdown = true;
> > > > + else
> > > > + dev_warn(chip->dev,
> > > > + "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140°C! Configuring stage 2 shutdown at 140°C.\n");
> > >
> > > Putting a non-ASCII character (the degree symbol) in your commit
> > > message is one thing, but are you sure it's wise to put it in the
> > > kernel logs?
> >
> > A few other drivers also do this
> > (drivers/gpu/drm/nouveau/nvkm/subdev/clk/base.c,
> > drivers/macintosh/windfarm_pm121.c), however that doesn't mean it's a
> > good idea. Will change to degC or C.
> >
> > > > + }
> > > > +
> > > > +skip:
> > > > + reg |= chip->thresh;
> > > > + if (disable_s2_shutdown)
> > > > + reg |= SHUTDOWN_CTRL1_OVERRIDE_S2;
> > > > +
> > > > + ret = qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
> > > > + if (ret < 0)
> > > > + return ret;
> > > > +
> > > > + return ret;
> > >
> > > Simplify the above lines to:
> > >
> > > return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg);
> >
> > Ouch, my code is indeed dumb ...
> >
> > > > @@ -313,12 +441,7 @@ static int qpnp_tm_probe(struct platform_device *pdev)
> > > > if (ret < 0)
> > > > return ret;
> > > >
> > > > - chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev, 0, chip,
> > > > - &qpnp_tm_sensor_ops);
> > > > - if (IS_ERR(chip->tz_dev)) {
> > > > - dev_err(&pdev->dev, "failed to register sensor\n");
> > > > - return PTR_ERR(chip->tz_dev);
> > > > - }
> > > > + chip->initialized = true;
> > >
> > > Should we add "thermal_zone_device_update(chip->tz_dev,
> > > THERMAL_EVENT_UNSPECIFIED);" here
> >
> > Seems reasonable, will do.
> >
> > > ...also: do we care about any type of locking for chip->initialized?
> > > Technically we can be running on weakly ordered memory so if
> > > qpnp_tm_update_temp_no_adc() is running on a different processor then
> > > possibly it could still keep returning the default temperature for a
> > > little while. We could try to analyze whether there's some sort of
> > > implicit barrier or we could add manual memory barriers, but generally
> > > I try to avoid that and just do the simple locking... What about just
> > > setting chip-Initialized = true at the end of qpnp_tm_init() while the
> > > mutex is still held?
> >
> > Thanks for pointing that out. I agree that we should keep things
> > simple, chip->initialized to true at the end of qpnp_tm_init() sounds
> > good to me.
> >
> > > I'd also love to hear from someone with more thermal framework
> > > experience to make sure it's legit to return a default value if
> > > someone calls us while we're initting. It seems sane to me but nice
> > > to confirm it's OK.
> >
> > An alternative could be to return THERMAL_TEMP_INVALID, however I
> > don't see this handled outside of thermal_core.c, not sure if it could
> > throw some other code off.
> >
> > Comments from thermal folks on either approach (or alternatives) are
> > definitely welcome :)
> >
> > > Overall I like the idea of this patch so hopefully others do too.
> > > Thanks for sending it out!
> >
>
> minor ask for next version
>
>
> WARNING: line over 80 characters
> #159: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:65:
> +#define STAGE2_THRESHOLD_MIN 125000 /* Stage 2 Threshold
> Min: 125 C */
>
> WARNING: line over 80 characters
> #160: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:66:
> +#define STAGE2_THRESHOLD_MAX 140000 /* Stage 2 Threshold
> Max: 140 C */
>
> ERROR: trailing statements should be on next line
> #201: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:186:
> + if (!chip->adc)) {
>
> CHECK: Unnecessary parentheses around 'temp == THERMAL_TEMP_INVALID'
> #227: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:220:
> + if ((temp == THERMAL_TEMP_INVALID) ||
> + (temp < STAGE2_THRESHOLD_MIN)) {
>
> CHECK: Unnecessary parentheses around 'temp < STAGE2_THRESHOLD_MIN'
> #227: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:220:
> + if ((temp == THERMAL_TEMP_INVALID) ||
> + (temp < STAGE2_THRESHOLD_MIN)) {
>
> CHECK: Unnecessary parentheses around 'trips[i].type ==
> THERMAL_TRIP_CRITICAL'
> #305: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:302:
> + if (of_thermal_is_trip_valid(chip->tz_dev, i) &&
> + (trips[i].type == THERMAL_TRIP_CRITICAL))
>
> CHECK: Alignment should match open parenthesis
> #386: FILE: drivers/thermal/qcom-spmi-temp-alarm.c:427:
> + chip->tz_dev = devm_thermal_zone_of_sensor_register(&pdev->dev,
> 0, chip,
> +
> &qpnp_tm_sensor_ops);
And it would be great if you could combine these two in your a single
series, say when you fix this patch and send a new version of this
series, please include these too:
https://patchwork.kernel.org/patch/10543335/
https://patchwork.kernel.org/patch/10543333/
>
> > Thanks for the review!
> >
> > Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
