Add clock phandle, of the core clock driving the mdio block, as an optional property to the Broadcom iProc mdio mux. The clock, when specified, will be used to setup the rate adjust registers in the mdio to derrive the mdio's operating frequency. Signed-off-by: Arun Parameswaran <arun.parameswaran@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt index dc8aa68..b58843f 100644 --- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt +++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.txt @@ -13,6 +13,9 @@ MDIO multiplexer node: Every non-ethernet PHY requires a compatible so that it could be probed based on this compatible string. +Optional properties: +- clocks: phandle of the core clock which drives the mdio block. + Additional information regarding generic multiplexer properties can be found at- Documentation/devicetree/bindings/net/mdio-mux.txt -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
