Hi Lee,
On 7/27/2018 1:26 AM, Lee Jones wrote:
On Mon, 23 Jul 2018, Jae Hyun Yoo wrote:
This commit adds PECI client MFD driver.
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Andrew Jeffery <andrew@xxxxxxxx>
Cc: James Feist <james.feist@xxxxxxxxxxxxxxx>
Cc: Jason M Biils <jason.m.bills@xxxxxxxxxxxxxxx>
Cc: Joel Stanley <joel@xxxxxxxxx>
Cc: Vernon Mauery <vernon.mauery@xxxxxxxxxxxxxxx>
---
drivers/mfd/Kconfig | 14 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/intel-peci-client.c | 182 ++++++++++++++++++++++++++
include/linux/mfd/intel-peci-client.h | 81 ++++++++++++
4 files changed, 278 insertions(+)
create mode 100644 drivers/mfd/intel-peci-client.c
create mode 100644 include/linux/mfd/intel-peci-client.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index f3fa516011ec..e38b591479d4 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -595,6 +595,20 @@ config MFD_INTEL_MSIC
Passage) chip. This chip embeds audio, battery, GPIO, etc.
devices used in Intel Medfield platforms.
+config MFD_INTEL_PECI_CLIENT
+ bool "Intel PECI client"
+ depends on (PECI || COMPILE_TEST)
+ select MFD_CORE
+ help
+ If you say yes to this option, support will be included for the
+ multi-funtional Intel PECI (Platform Environment Control Interface)
+ client. PECI is a one-wire bus interface that provides a communication
+ channel from PECI clients in Intel processors and chipset components
+ to external monitoring or control devices.
+
+ Additional drivers must be enabled in order to use the functionality
+ of the device.
+
config MFD_IPAQ_MICRO
bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
depends on SA1100_H3100 || SA1100_H3600
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2852a6042ecf..29e2cacc58bd 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -203,6 +203,7 @@ obj-$(CONFIG_MFD_INTEL_LPSS) += intel-lpss.o
obj-$(CONFIG_MFD_INTEL_LPSS_PCI) += intel-lpss-pci.o
obj-$(CONFIG_MFD_INTEL_LPSS_ACPI) += intel-lpss-acpi.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
+obj-$(CONFIG_MFD_INTEL_PECI_CLIENT) += intel-peci-client.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
diff --git a/drivers/mfd/intel-peci-client.c b/drivers/mfd/intel-peci-client.c
new file mode 100644
index 000000000000..d7702cf1ea50
--- /dev/null
+++ b/drivers/mfd/intel-peci-client.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Intel Corporation
+
+#include <linux/bitfield.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel-peci-client.h>
+#include <linux/module.h>
+#include <linux/peci.h>
+#include <linux/of_device.h>
+
+enum cpu_gens {
+ CPU_GEN_HSX = 0, /* Haswell Xeon */
+ CPU_GEN_BRX, /* Broadwell Xeon */
+ CPU_GEN_SKX, /* Skylake Xeon */
+};
+
+static struct mfd_cell peci_functions[] = {
+ {
+ .name = "peci-cputemp",
+ .of_compatible = "intel,peci-cputemp",
+ },
+ {
+ .name = "peci-dimmtemp",
+ .of_compatible = "intel,peci-dimmtemp",
+ },
+};
The more I look at this driver, the less I think it fits into MFD.
What's stopping you from registering these devices directly from DT?
Because DT doesn't allow 2 nodes at the same address so Rob suggested
MFD for this case.
Thanks,
Jae
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
