Re: [PATCH v3 02/23] thermal: armada: remove useless register accesses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Miquel,

You know, it is usually useful to Cc the author of the lines a patch touches :-)

On 16 July 2018 at 11:41, Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> Prepare the migration to use regmaps by first simplifying the
> initialization functions: avoid unnecessary write/read cycles on
> configuration registers.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
>  drivers/thermal/armada_thermal.c | 8 ++------
>  1 file changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
> index 077e8e562306..6fdb90b3c001 100644
> --- a/drivers/thermal/armada_thermal.c
> +++ b/drivers/thermal/armada_thermal.c
> @@ -103,16 +103,13 @@ static void armadaxp_init_sensor(struct platform_device *pdev,
>
>         reg = readl_relaxed(priv->control1);
>         reg |= PMU_TDC0_OTF_CAL_MASK;
> -       writel(reg, priv->control1);
>
>         /* Reference calibration value */
>         reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
>         reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
> -       writel(reg, priv->control1);
>
>         /* Reset the sensor */
> -       reg = readl_relaxed(priv->control1);
> -       writel((reg | PMU_TDC0_SW_RST_MASK), priv->control1);
> +       reg |= PMU_TDC0_SW_RST_MASK;
>
>         writel(reg, priv->control1);
>
> @@ -129,14 +126,13 @@ static void armada370_init_sensor(struct platform_device *pdev,
>
>         reg = readl_relaxed(priv->control1);
>         reg |= PMU_TDC0_OTF_CAL_MASK;
> -       writel(reg, priv->control1);
>
>         /* Reference calibration value */
>         reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
>         reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
> -       writel(reg, priv->control1);
>
>         reg &= ~PMU_TDC0_START_CAL_MASK;
> +
>         writel(reg, priv->control1);
>

IIRC, the documentation for this hardware block was a meager.

Are you sure there isn't any requirement for the calibration
start to be issued separately or something like that?
-- 
Ezequiel García, VanguardiaSur
www.vanguardiasur.com.ar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux