Some SCIF versions mux error and break interrupts together and then provide
a separate interrupt ID for just TEI/DRI.
Allow all 6 types of interrupts to be specified via platform data (or DT)
and for any signals that are muxed together (have the same interrupt
number) simply register one handler.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
v2:
* Move compressed SCIF reg address space to a separate commit
* Handle all 6 possible interrupt types
---
drivers/tty/serial/sh-sci.c | 44 +++++++++++++++++++++++++++++++++++++++++---
1 file changed, 41 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index d9202ad1c9ca..f1272fecbe44 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -65,6 +65,8 @@ enum {
SCIx_RXI_IRQ,
SCIx_TXI_IRQ,
SCIx_BRI_IRQ,
+ SCIx_DRI_IRQ,
+ SCIx_TEI_IRQ,
SCIx_NR_IRQS,
SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
@@ -1683,11 +1685,26 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
return IRQ_HANDLED;
}
+static irqreturn_t sci_br_interrupt(int irq, void *ptr);
+
static irqreturn_t sci_er_interrupt(int irq, void *ptr)
{
struct uart_port *port = ptr;
struct sci_port *s = to_sci_port(port);
+ if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) {
+ /* Break and Error interrupts are muxed */
+ unsigned short ssr_status = serial_port_in(port, SCxSR);
+
+ /* Break Interrupt */
+ if (ssr_status & SCxSR_BRK(port))
+ sci_br_interrupt(irq, ptr);
+
+ /* Break only? */
+ if (!(ssr_status & SCxSR_ERRORS(port)))
+ return IRQ_HANDLED;
+ }
+
/* Handle errors */
if (port->type == PORT_SCI) {
if (sci_handle_errors(port)) {
@@ -1794,6 +1811,16 @@ static const struct sci_irq_desc {
.handler = sci_br_interrupt,
},
+ [SCIx_DRI_IRQ] = {
+ .desc = "rx ready",
+ .handler = sci_rx_interrupt,
+ },
+
+ [SCIx_TEI_IRQ] = {
+ .desc = "tx end",
+ .handler = sci_tx_interrupt,
+ },
+
/*
* Special muxed handler.
*/
@@ -1806,12 +1833,19 @@ static const struct sci_irq_desc {
static int sci_request_irq(struct sci_port *port)
{
struct uart_port *up = &port->port;
- int i, j, ret = 0;
+ int i, j, w, ret = 0;
for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
const struct sci_irq_desc *desc;
int irq;
+ /* Check if already registered (muxed) */
+ for (w = 0; w < i; w++)
+ if (port->irqs[w] == port->irqs[i])
+ w = i + 1;
+ if (w > i)
+ continue;
+
if (SCIx_IRQ_IS_MUXED(port)) {
i = SCIx_MUX_IRQ;
irq = up->irq;
@@ -2799,8 +2833,10 @@ static int sci_init_single(struct platform_device *dev,
/* The SCI generates several interrupts. They can be muxed together or
* connected to different interrupt lines. In the muxed case only one
- * interrupt resource is specified. In the non-muxed case three or four
- * interrupt resources are specified, as the BRI interrupt is optional.
+ * interrupt resource is specified as there is only one interrupt ID.
+ * In the non-muxed case, up to 6 interrupt signals might be generated
+ * from the SCI, however those signals might have their own individual
+ * interrupt ID numbers, or muxed together with another interrupt.
*/
if (sci_port->irqs[0] < 0)
return -ENXIO;
@@ -2809,6 +2845,8 @@ static int sci_init_single(struct platform_device *dev,
sci_port->irqs[1] = sci_port->irqs[0];
sci_port->irqs[2] = sci_port->irqs[0];
sci_port->irqs[3] = sci_port->irqs[0];
+ sci_port->irqs[4] = sci_port->irqs[0];
+ sci_port->irqs[5] = sci_port->irqs[0];
}
sci_port->params = sci_probe_regmap(p);
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
