Re: [PATCH 04/10] mmc: tegra: Disable card clock during pad calibration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 24.07.2018 17:34, Aapo Vienamo wrote:
Disable the card clock during automatic pad drive strength calibration
and re-enable it aftewards.

s/aftewards/afterwards/.


Signed-off-by: Aapo Vienamo <avienamo@xxxxxxxxxx>
---
  drivers/mmc/host/sdhci-tegra.c | 27 +++++++++++++++++++++++++++
  1 file changed, 27 insertions(+)

diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 61067b7..0de74f4 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -52,6 +52,7 @@
  #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL			0x1e0
  #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_MASK	0x0000000f
  #define SDHCI_TEGRA_SDMEM_COMP_PADCTRL_VREF_SEL_VAL	0x7
+#define SDHCI_TEGRA_PAD_E_INPUT_OR_E_PWRD		BIT(31)

Looks like this should be in the previous patch.

#define SDHCI_TEGRA_AUTO_CAL_STATUS 0x1ec
  #define SDHCI_TEGRA_AUTO_CAL_ACTIVE     BIT(31)
@@ -226,11 +227,35 @@ static void tegra_sdhci_configure_cal_pad(struct sdhci_host *host, bool enable)
  	udelay(1);
  }
+static bool tegra_sdhci_configure_card_clk(struct sdhci_host *host, bool enable)
+{
+	bool orig_enabled;
+	u32 reg;
+
+	reg = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	orig_enabled = reg & SDHCI_CLOCK_CARD_EN;

I would do !!(reg & SDHCI_CLOCK_CARD_EN) here.

+
+	if (orig_enabled == enable)
+		return orig_enabled;
+
+	if (enable)
+		reg |= SDHCI_CLOCK_CARD_EN;
+	else
+		reg &= ~SDHCI_CLOCK_CARD_EN;
+
+	sdhci_writew(host, reg, SDHCI_CLOCK_CONTROL);
+
+	return orig_enabled;
+}
+
  static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
  {
  	unsigned timeout = 10;
+	bool card_clk_enabled;
  	u32 reg;
+ card_clk_enabled = tegra_sdhci_configure_card_clk(host, false);
+
  	tegra_sdhci_configure_cal_pad(host, true);
reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
@@ -248,6 +273,8 @@ static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
tegra_sdhci_configure_cal_pad(host, false); + tegra_sdhci_configure_card_clk(host, card_clk_enabled);
+
  	if (timeout == 0)
  		dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
  }

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux