Consistently order nodes referenced by label alphabetically. No functional changes. This prepares for adding nodes. Signed-off-by: Andreas Färber <afaerber@xxxxxxx> --- arch/mips/boot/dts/img/pistachio_marduk.dts | 76 ++++++++++++++--------------- 1 file changed, 38 insertions(+), 38 deletions(-) diff --git a/arch/mips/boot/dts/img/pistachio_marduk.dts b/arch/mips/boot/dts/img/pistachio_marduk.dts index cf9cebd52294..f03f4114e645 100644 --- a/arch/mips/boot/dts/img/pistachio_marduk.dts +++ b/arch/mips/boot/dts/img/pistachio_marduk.dts @@ -74,40 +74,34 @@ }; }; -&internal_dac { - VDD-supply = <&internal_dac_supply>; -}; - -&spfi1 { +&adc { status = "okay"; - - pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>, - <&spim1_cs1_pin>; - pinctrl-names = "default"; - cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "spansion,s25fl016k", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - }; + vref-supply = <®_1v8>; + adc-reserved-channels = <0x10>; }; -&uart0 { +&enet { status = "okay"; - assigned-clock-rates = <114278400>, <1843200>; }; -&uart1 { +&i2c2 { status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + }; -&usb { +&i2c3 { status = "okay"; + clock-frequency = <400000>; }; -&enet { - status = "okay"; +&internal_dac { + VDD-supply = <&internal_dac_supply>; }; &pin_enet { @@ -118,12 +112,6 @@ drive-strength = <2>; }; -&sdhost { - status = "okay"; - bus-width = <4>; - disable-wp; -}; - &pin_sdhost_cmd { drive-strength = <2>; }; @@ -140,24 +128,36 @@ pinctrl-names = "default"; }; -&adc { +&sdhost { status = "okay"; - vref-supply = <®_1v8>; - adc-reserved-channels = <0x10>; + bus-width = <4>; + disable-wp; }; -&i2c2 { +&spfi1 { status = "okay"; - clock-frequency = <400000>; - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; + pinctrl-0 = <&spim1_pins>, <&spim1_quad_pins>, <&spim1_cs0_pin>, + <&spim1_cs1_pin>; + pinctrl-names = "default"; + cs-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>, <&gpio0 1 GPIO_ACTIVE_HIGH>; + + flash@0 { + compatible = "spansion,s25fl016k", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; }; +}; +&uart0 { + status = "okay"; + assigned-clock-rates = <114278400>, <1843200>; }; -&i2c3 { +&uart1 { + status = "okay"; +}; + +&usb { status = "okay"; - clock-frequency = <400000>; }; -- 2.16.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html