MCP3911 is a dual channel Analog Front End (AFE) containing two
synchronous sampling delta-sigma Analog-to-Digital Converters (ADC).
Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
Signed-off-by: Kent Gustavsson <kent@xxxxxxxxxx>
---
.../devicetree/bindings/iio/adc/mcp3911.txt | 33 ++++++++++++++++++++++
1 file changed, 33 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
new file mode 100644
index 000000000000..e233ee94ad96
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
@@ -0,0 +1,33 @@
+* Microchip MCP3911 Dual channel analog front end (ADC)
+
+Required properties:
+ - compatible: Should be "microchip,mcp3911"
+ - reg: SPI chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt.
+ Max frequency for this chip is 20MHz.
+
+Optional properties:
+ - device-addr: Device address when multiple MCP3911 chips are present on the
+ same SPI bus. Valid values are 0-3. Defaults to 0.
+ - external-clock: Use external clock instead of crystal oscillator.
+ - external-vref: Use external voltage reference
+ - vref-supply: Phandle to the external reference voltage supply. (only valid in combination with `external-vref`)
+ - ch0-width: width for channel0. Valid widths are 16 and 24bits.
+ - ch1-width: width for channel1. Valid widths are 16 and 24bits.
+
+
+Example:
+adc@0 {
+ compatible = "microchip,mcp3911";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ device-addr = <0>;
+ ch0-width = <16>;
+ ch1-width = <24>;
+ external-clock;
+ external-vref;
+ vref-supply = <&vref_reg>;
+};
--
2.11.0.rc2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
