From: Daniel Silsby <dansilsby@xxxxxxxxx> Normally, we wouldn't set the channel transfer count register directly when using descriptor-driven transfers. However, there is no harm in doing so, and it allows jz4780_dma_desc_residue() to report the correct residue of an ongoing transfer, no matter when it is called. Signed-off-by: Daniel Silsby <dansilsby@xxxxxxxxx> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx> --- drivers/dma/dma-jz4780.c | 9 +++++++++ 1 file changed, 9 insertions(+) v2: No change v3: No change diff --git a/drivers/dma/dma-jz4780.c b/drivers/dma/dma-jz4780.c index cc2a86844db4..78849131c81d 100644 --- a/drivers/dma/dma-jz4780.c +++ b/drivers/dma/dma-jz4780.c @@ -530,6 +530,15 @@ static void jz4780_dma_begin(struct jz4780_dma_chan *jzchan) jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DRT, jzchan->transfer_type); + /* + * Set the transfer count. This is redundant for a descriptor-driven + * transfer. However, there can be a delay between the transfer start + * time and when DTCn reg contains the new transfer count. Setting + * it explicitly ensures residue is computed correctly at all times. + */ + jz4780_dma_chn_writel(jzdma, jzchan->id, JZ_DMA_REG_DTC, + jzchan->desc->desc[jzchan->curr_hwdesc].dtc); + /* Write descriptor address and initiate descriptor fetch. */ desc_phys = jzchan->desc->desc_phys + (jzchan->curr_hwdesc * sizeof(*jzchan->desc->desc)); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
