On Fri, Jul 20, 2018 at 9:13 AM Doug Anderson <dianders@xxxxxxxxxxxx> wrote:
>
> Rob,
>
> On Fri, Jul 20, 2018 at 7:10 AM, Rob Herring <robh@xxxxxxxxxx> wrote:
> > On Fri, Jul 06, 2018 at 04:31:42PM -0700, Douglas Anderson wrote:
> >> A few patches have landed for the qcom-qmp PHY that affect how you
> >> would write a device tree node. ...yet the bindings weren't updated.
> >> Let's remedy the situation and make the bindings refelect reality.
> >
> > "dt-bindings: phy: ..." for the subject.
>
> Sorry. Every subsystem has different conventions for this so I
> usually just do a "git log" on the file and make my best guess. I'll
> try to remember this for next time though.
NP. I'd like to add this info to MAINTAINERS or maybe a git commit
hook could figure this out automagically.
> In this case, though, it looks like this already landed. I see this
> patch in Kishon's next branch.
>
>
> >> Fixes: efb05a50c956 ("phy: qcom-qmp: Add support for QMP V3 USB3 PHY")
> >> Fixes: ac0d239936bd ("phy: qcom-qmp: Add support for runtime PM")
> >> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> >> ---
> >>
> >> .../devicetree/bindings/phy/qcom-qmp-phy.txt | 14 ++++++++++++--
> >> 1 file changed, 12 insertions(+), 2 deletions(-)
> >>
> >> diff --git a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> >> index 266a1bb8bb6e..0c7629e88bf3 100644
> >> --- a/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> >> +++ b/Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
> >> @@ -12,7 +12,14 @@ Required properties:
> >> "qcom,sdm845-qmp-usb3-phy" for USB3 QMP V3 phy on sdm845,
> >> "qcom,sdm845-qmp-usb3-uni-phy" for USB3 QMP V3 UNI phy on sdm845.
> >>
> >> - - reg: offset and length of register set for PHY's common serdes block.
> >> + - reg:
> >> + - For "qcom,sdm845-qmp-usb3-phy":
> >> + - index 0: address and length of register set for PHY's common serdes
> >> + block.
> >> + - named register "dp_com" (using reg-names): address and length of the
> >> + DP_COM control block.
> >
> > You need to list reg-names and what are the names for the other 2
> > regions?
>
> Here's the code works. You can tell me how you want this expressed in
> the bindings:
>
> * In all cases the driver maps its main memory range (for the common
> serdes block) without specifying any name. This is equivalent to
> asking for index 0.
>
> * For "qcom,sdm845-qmp-usb3-phy" the driver requests a second memory
> range by name using the name "dp_com".
>
> ...basically the driver is inconsistent between using names and
> indices and I was trying to document that fact.
That's fine as long as the indices are fixed.
>
> I guess options:
>
> 1. I could reword this so it's clearer (open to suggestions)
>
> 2. I could add something to the bindings saying that the first reg
> name should be "reg-base" or something. Then the question is whether
> we should go to the code and start enforcing that. If we do choose to
> enforce it then it's technically breaking compatibility (though I
> doubt there is any real dts in the wild). If we don't choose to
> enforce it then why did we bother saying what it should be named?
I think you need to state index 1 is dp_com (and only for
"qcom,sdm845-qmp-usb3-phy") and a name for index 0. 'reg-base' doesn't
seem great, but I don't have another suggestion.
For the driver, it's not the driver's job to enforce any of this.
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
