Re: [PATCH 2/2] Documentation: dt-bindings: add adi,adgs140x doc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 13, 2018 at 03:30:35PM +0300, Mircea Caprioru wrote:
> Adding dt-bindings documentation for adgs1408/1409 multiplexer. The
> bindings follow the standard SPI and mux bindings and do not require any
> additional custom properties.

Drop "Documentation: " from the subject.

> Signed-off-by: Mircea Caprioru <mircea.caprioru@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/mux/adi,adgs140x.txt  | 39 +++++++++++++++++++
>  MAINTAINERS                                   |  1 +
>  2 files changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mux/adi,adgs140x.txt
> 
> diff --git a/Documentation/devicetree/bindings/mux/adi,adgs140x.txt b/Documentation/devicetree/bindings/mux/adi,adgs140x.txt
> new file mode 100644
> index 000000000000..5f2c2b9e9781
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mux/adi,adgs140x.txt
> @@ -0,0 +1,39 @@
> +Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
> +
> +Required properties:
> +- compatible : "adi,adgs1408" or "adi,adgs1409"
> +- #mux-control-cells : <0>
> +* Standard mux-controller bindings as described in mux-controller.txt

What would these be because the only one you have in the example is 
already listed here.

> +
> +Optional properties:
> +- idle-state : if present, array of states that the mux controllers will have
> +  when idle. The special state MUX_IDLE_AS_IS is the default and
> +  MUX_IDLE_DISCONNECT is also supported.
> +
> +States 0 through 7 correspond to signals S1 through S8 in the datasheet.
> +
> +Example:
> +
> +	/*
> +	 * One mux controller.
> +	 * Mux 1 to 8 set to idle as is (no idle-state declared)
> +	 */
> +	&spi0 {
> +		mux: mux-controller@2 {

unit address should be 0.

> +			compatible = "adi,adgs1408";
> +			reg = <0>;
> +			spi-max-frequency = <1000000>;
> +			#mux-control-cells = <0>;
> +		};
> +	}
> +
> +	adc-mux@3 {
> +		compatible = "io-channel-mux";
> +		io-channels = <&adc 1>;
> +		io-channel-names = "parent";
> +		mux-controls = <&mux>;
> +
> +		channels = "out_a0", "out_a1", "test0", "test1",
> +			"out_b0", "out_b1", "testb0", "testb1";
> +
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7aa68f38ea4b..6e69c3e2d27a 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -816,6 +816,7 @@ W:	http://wiki.analog.com/
>  W:	http://ez.analog.com/community/linux-device-drivers
>  S:	Supported
>  F:	drivers/mux/adgs140x.c
> +F:	Documentation/devicetree/bindings/mux/adgs140x.txt
>  
>  ANALOG DEVICES INC ADV7180 DRIVER
>  M:	Lars-Peter Clausen <lars@xxxxxxxxxx>
> -- 
> 2.17.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux