On Thu, Jul 12, 2018 at 06:36:00PM +0300, Stefan Popa wrote:
> This patch adds support for the adxl372 FIFO. In order to accomplish this,
> triggered buffers were used.
>
> The number of FIFO samples which trigger the watermark interrupt can be
> configured by using the buffer watermark, while the format depends on the
> selected channels.The FIFO data along with the timestamp is pushed to the
> IIO device's buffer.
>
> Signed-off-by: Stefan Popa <stefan.popa@xxxxxxxxxx>
> ---
> .../devicetree/bindings/iio/accel/adxl372.txt | 7 +
This belongs in patch 2. Bindings should reflect the h/w, not driver
features.
> drivers/iio/accel/adxl372.c | 346 ++++++++++++++++++++-
> 2 files changed, 352 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/iio/accel/adxl372.txt b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> index fea4baf..73d7e03 100644
> --- a/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> +++ b/Documentation/devicetree/bindings/iio/accel/adxl372.txt
> @@ -7,10 +7,17 @@ Required properties:
> - reg: SPI chip select number for the device
> - spi-max-frequency: Max SPI frequency to use
>
> +Optional properties:
> + - interrupt-parent: phandle to the parent interrupt controller
Don't need to put this in the binding.
> + - interrupts: interrupt mapping for GPIO IRQ, it should by configured with
> + flag IRQ_TYPE_EDGE_FALLING
> +
> Example:
>
> accelerometer@0 {
> compatible = "adi,adxl372";
> reg = <0>;
> spi-max-frequency = <1000000>;
> + interrupt-parent = <&gpio>;
> + interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
> };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
