Hello,
the 'EDIMM Starter Kit 1.5 MIPI Evaluation" board, whose support has been
introduced by commit:
commit 3fe08835773121870b1de7d0cac9a4ade796661e ("ARM: dts: imx6q: Add Engicam
i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
is actually based on 1.5 version of the "i.Core 1.5 MX6" CPU module which
differs from the original "i.Core MX6" for a few details, including the one that
has sparkled this activity: the ethernet PHY interface clock provider.
Instead of fixing the PHY clock provider in the imx6q-icore-mipi.dts file, I
preferred adding a new .dtsi for the 1.5 version of the module, to gather
differences between version in a single place. Then I've referenced the new one
in the dts file.
As a result, the ethernet interface is now working on the EDIMM 1.5 MIPI
evaluation kit.
Thanks
j
Jacopo Mondi (2):
ARM: dts: imx6qdl: Add Engicam i.Core 1.5 MX6
ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6
arch/arm/boot/dts/imx6q-icore-mipi.dts | 4 ++--
arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 34 ++++++++++++++++++++++++++++++++
2 files changed, 36 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
