On Thu, Jul 19, 2018 at 11:03:54AM +0200, Matthias Brugger wrote:
>
>
> On 18/07/18 18:43, Manivannan Sadhasivam wrote:
> > Hi Matthias,
> >
> > On Wed, Jul 18, 2018 at 05:07:38PM +0200, Matthias Brugger wrote:
> >>
> >>
> >> On 17/07/18 16:04, Manivannan Sadhasivam wrote:
> >>> Hi Matthias,
> >>>
> >>> On Mon, Jul 16, 2018 at 03:24:44PM +0200, Matthias Brugger wrote:
> >>>> Hi Manivanna,
> >>>>
> >>>> On 05/06/18 18:34, Manivannan Sadhasivam wrote:
> >>>>> Add initial device tree support for Mediatek X20 Development Board
> >>>>> based on MT6797 Deca core SoC. This board is one of the 96Boards
> >>>>> Consumer Edition platform.
> >>>>>
> >>>>> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
> >>>>> ---
> >>>>> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> >>>>> .../boot/dts/mediatek/mt6797-x20-dev.dts | 33 +++++++++++++++++++
> >>>>> 2 files changed, 34 insertions(+)
> >>>>> create mode 100644 arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
> >>>>>
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> index ac17f60f998c..5b7fd6ad96e4 100644
> >>>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> >>>>> @@ -3,5 +3,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt2712-evb.dtb
> >>>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6755-evb.dtb
> >>>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6795-evb.dtb
> >>>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
> >>>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
> >>>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
> >>>>> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-evb.dtb
> >>>>> diff --git a/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
> >>>>> new file mode 100644
> >>>>> index 000000000000..2c09ca95d9e2
> >>>>> --- /dev/null
> >>>>> +++ b/arch/arm64/boot/dts/mediatek/mt6797-x20-dev.dts
> >>>>> @@ -0,0 +1,33 @@
> >>>>> +// SPDX-License-Identifier: GPL-2.0
> >>>>> +/*
> >>>>> + * Device Tree Source for MediaTek X20 Development Board
> >>>>> + *
> >>>>> + * Copyright (C) 2018, Linaro Ltd.
> >>>>> + *
> >>>>> + */
> >>>>> +
> >>>>> +/dts-v1/;
> >>>>> +
> >>>>> +#include "mt6797.dtsi"
> >>>>> +
> >>>>> +/ {
> >>>>> + model = "Mediatek X20 Development Board";
> >>>>> + compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
> >>>>> +
> >>>>> + aliases {
> >>>>> + serial0 = &uart1;
> >>>>> + };
> >>>>
> >>>> Sorry for the late answer.
> >>>> Why did you use uart1 instead of uart0?
> >>>> I know that uart0 is used by the bootloader, but because of their exotic flash
> >>>> procedure I find it quite useful to see this messages in my serial connection.
> >>>> Of course you can only use 921600 baudrate then.
> >>>>
> >>>
> >>> The reason is, most of the Mezzanine boards use USB to UART bridge on the
> >>> UART1 port available on the Low Speed Expansion header. Additionally, the
> >>> convention followed by most of the Consumer Edition 96Boards is to use UART1
> >>> as the debug serial port. That's why eventhough the bootloader is using UART0,
> >>> I forced the kernel to use UART1.
> >>>
> >>
> >> Sounds reasonable, I don't have this 96 boards adapter and I forgot about it.
> >>
> >
> > That's fine :)
> >
> >>>>> +
> >>>>> + memory@40000000 {
> >>>>> + device_type = "memory";
> >>>>> + reg = <0 0x40000000 0 0x1e605000>;
> >>>>
> >>>> How comes this strange number for the memory size?
> >>>>
> >>>
> >>> Actually, the memory size is extracted from the downstream kernel [1].
> >>>
> >>
> >> Hm, Archermind "Helio X20 Development Board Hardware Manual" talks about 2GB
> >> LPDDR3-SDRAM. Would you mind to check if that is actually true?
> >>
> >
> > Yes, it is 2GB. Shall I change the size to 0x80000000?
> >
>
> Best would be if you boot the machine with this value and see if things look
> sane. Then resubmit. The other option is to resubmit and I'll check it tomorrow :)
>
Tested with the modified size, 0x80000000. Board is booting without any issues, so
pushed out the v3.
Thanks,
Mani
> Let me know if you can't do it for tomorrow morning. I plan to submit the pull
> requests tomorrow as I'm through nearly all open patches (yes, two days earlier
> \o/ )
>
> Best regards,
> Matthias
>
> > Thanks,
> > Mani
> >
> >>>> BTW do you know the differences between the EVB board and the x20 one?
> >>>> I used the evb dts for booting up to now.
> >>>>
> >>>
> >>> Sorry, I don't know the difference between both boards!
> >>
> >> Sure, no problem :)
> >>
> >> Regards,
> >> Matthias
> >>
> >>>
> >>> Thanks,
> >>> Mani
> >>>
> >>> [1] https://github.com/helio-x20/linux/blob/helio-x20/arch/arm64/boot/dts/amt6797_64_open.dts#L8
> >>>
> >>>> Best regards,
> >>>> Matthias
> >>>>
> >>>>> + };
> >>>>> +
> >>>>> + chosen {
> >>>>> + stdout-path = "serial0:115200n8";
> >>>>> + };
> >>>>> +};
> >>>>> +
> >>>>> +&uart1 {
> >>>>> + status = "okay";
> >>>>> +};
> >>>>>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
