Hi Stephen and Mike, On 17.7.2018 21:59, Jolly Shah wrote: > From: Jolly Shah <jolly.shah@xxxxxxxxxx> > > This patch adds CCF compliant clock driver for ZynqMP. > Clock driver queries supported clock information from > firmware and regiters pll and output clocks with CCF. > > Signed-off-by: Rajan Vaja <rajanv@xxxxxxxxxx> > Signed-off-by: Tejas Patel <tejasp@xxxxxxxxxx> > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> > Signed-off-by: Jolly Shah <jollys@xxxxxxxxxx> > --- > drivers/clk/Kconfig | 1 + > drivers/clk/Makefile | 1 + > drivers/clk/zynqmp/Kconfig | 10 + > drivers/clk/zynqmp/Makefile | 4 + > drivers/clk/zynqmp/clk-gate-zynqmp.c | 144 +++++++ > drivers/clk/zynqmp/clk-mux-zynqmp.c | 141 +++++++ > drivers/clk/zynqmp/clk-zynqmp.h | 68 ++++ > drivers/clk/zynqmp/clkc.c | 719 +++++++++++++++++++++++++++++++++++ > drivers/clk/zynqmp/divider.c | 217 +++++++++++ > drivers/clk/zynqmp/pll.c | 335 ++++++++++++++++ > include/linux/firmware/xlnx-zynqmp.h | 1 + > 11 files changed, 1641 insertions(+) > create mode 100644 drivers/clk/zynqmp/Kconfig > create mode 100644 drivers/clk/zynqmp/Makefile > create mode 100644 drivers/clk/zynqmp/clk-gate-zynqmp.c > create mode 100644 drivers/clk/zynqmp/clk-mux-zynqmp.c > create mode 100644 drivers/clk/zynqmp/clk-zynqmp.h > create mode 100644 drivers/clk/zynqmp/clkc.c > create mode 100644 drivers/clk/zynqmp/divider.c > create mode 100644 drivers/clk/zynqmp/pll.c DT binding was reviewed by Stephen but I can't see any review for the driver itself. Should I wait for your review or do you want to take binding doc 09/10 and 10/10 separately or this can go via arm-soc tree? Thanks, Michal -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
