Hi Fabio, On 07/17/2018 02:28 PM, Fabio Estevam wrote: > Hi Sébastien, > > On Tue, Jul 17, 2018 at 4:23 AM, Sébastien Szymanski > <sebastien.szymanski@xxxxxxxxxxxx> wrote: >> This patch adds support for the Armadeus ST0700 Adapt. It comes with a >> Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT and an adapter board so >> that it can be connected on the TFT header of Armadeus Dev boards. >> >> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@xxxxxxxxxxxx> >> --- >> .../display/panel/armadeus,st0700-adapt.txt | 9 +++++++ >> drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++ >> 2 files changed, 38 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt >> >> diff --git a/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt >> new file mode 100644 >> index 000000000000..a30d63db3c8f >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/display/panel/armadeus,st0700-adapt.txt >> @@ -0,0 +1,9 @@ >> +Armadeus ST0700 Adapt. A Santek ST0700I5Y-RBSLW 7.0" WVGA (800x480) TFT with >> +an adapter board. >> + >> +Required properties: >> +- compatible: "armadeus,st0700-adapt" > > Shouldn't this be named "santek,st0700i5y" instead? > > Santek is the vendor of the panel and st0700i5y is the model. You're right but Armadeus doesn't provide the panel as-is. Armadeus adds an adapter board so it can be connected on the development boards. [1] Even though the panel supports MEDIA_BUS_FMT_RGB888_1X24, with the adapter board the bus format has to be MEDIA_BUS_FMT_RGB666_1X18. [1] http://www.opossom.com/english/products-peripherals-st0700_adapt.html Regards, > > Then you could add a "santek" entry in > Documentation/devicetree/bindings/vendor-prefixes.txt. > > Regards, > > Fabio Estevam > -- Sébastien Szymanski Software engineer, Armadeus Systems Tel: +33 (0)9 72 29 41 44 Fax: +33 (0)9 72 28 79 26 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
