Add the DT bindings documentation for axg sound card
Signed-off-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
---
.../bindings/sound/amlogic,axg-sound-card.txt | 124 +++++++++++++++++++++
1 file changed, 124 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
new file mode 100644
index 000000000000..39e005da0407
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-sound-card.txt
@@ -0,0 +1,124 @@
+Amlogic AXG sound card:
+
+Required properties:
+
+- compatible: "amlogic,axg-sound-card"
+- amlogic,name : User specified audio sound card name, one string
+
+Optional properties:
+
+- amlogic,aux-devs : List of phandles pointing to auxiliary devices
+- amlogic,widgets : Please refer to widgets.txt.
+- amlogic,routing : A list of the connections between audio components.
+
+Subnodes:
+
+- amlogic,dai-link: Container for dai-link level properties and the
+ CODEC sub-nodes. There should be at least one (and
+ probably) subnode of this type.
+
+Required dai-link properties:
+
+- sound-dai: phandle and port of the CPU DAI.
+
+Required TDM Backend dai-link properties:
+- dai-format : CPU/CODEC common audio format
+
+Optional TDM Backend dai-link properties:
+- dai-tdm-slot-rx-mask-{0,1,2,3}: Receive direction slot masks
+- dai-tdm-slot-tx-mask-{0,1,2,3}: Transmit direction slot masks
+ When omitted, mask is assumed to have to no
+ slots. A valid must have at one slot, so at
+ least one these mask should be provided with
+ an enabled slot.
+- dai-tdm-slot-num : Please refer to tdm-slot.txt.
+ If omitted, slot number is set to accommodate the largest
+ mask provided.
+- dai-tdm-slot-width : Please refer to tdm-slot.txt. default to 32 if omitted.
+- mclk-fs : Multiplication factor between stream rate and mclk
+
+Backend dai-link subnodes:
+
+- codec: dai-link representing backend links should have at least one subnode.
+ One subnode for each codec of the dai-link.
+ dai-link representing frontend links have no codec, therefore have no
+ subnodes
+
+Required codec subnodes properties:
+
+- sound-dai: phandle and port of the CODEC DAI.
+
+Optional codec subnodes properties:
+
+- dai-tdm-slot-tx-mask : Please refer to tdm-slot.txt.
+- dai-tdm-slot-rx-mask : Please refer to tdm-slot.txt.
+
+Example:
+
+sound {
+ compatible = "amlogic,axg-sound-card";
+ amlogic,name = "AXG-S420";
+ amlogic,aux-devs = <&tdmin_a>, <&tdmout_c>;
+ amlogic,widgets = "Line", "Lineout",
+ "Line", "Linein",
+ "Speaker", "Speaker1 Left",
+ "Speaker", "Speaker1 Right";
+ "Speaker", "Speaker2 Left",
+ "Speaker", "Speaker2 Right";
+ amlogic,routing = "TDMOUT_C IN 0", "FRDDR_A OUT 2",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "TDM_C Playback", "TDMOUT_C OUT",
+ "TDMIN_A IN 2", "TDM_C Capture",
+ "TDMIN_A IN 5", "TDM_C Loopback",
+ "TODDR_A IN 0", "TDMIN_A OUT",
+ "Lineout", "Lineout AOUTL",
+ "Lineout", "Lineout AOUTR",
+ "Speaker1 Left", "SPK1 OUT_A",
+ "Speaker2 Left", "SPK2 OUT_A",
+ "Speaker1 Right", "SPK1 OUT_B",
+ "Speaker2 Right", "SPK2 OUT_B",
+ "Linein AINL", "Linein",
+ "Linein AINR", "Linein";
+
+ amlogic,dai-link@0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ amlogic,dai-link@1 {
+ sound-dai = <&toddr_a>;
+ };
+
+ amlogic,dai-link@2 {
+ sound-dai = <&tdmif_c>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ dai-tdm-slot-rx-mask-1 = <1 1>;
+ mclk-fs = <256>;
+
+ codec@0 {
+ sound-dai = <&lineout>;
+ };
+
+ codec@1 {
+ sound-dai = <&speaker_amp1>;
+ };
+
+ codec@2 {
+ sound-dai = <&speaker_amp2>;
+ };
+
+ codec@3 {
+ sound-dai = <&linein>;
+ };
+
+ };
+
+ amlogic,dai-link@4 {
+ sound-dai = <&spdifout>;
+
+ codec {
+ sound-dai = <&spdif_dit>;
+ };
+ };
+};
--
2.14.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
