[PATCH 4/5] mips: dts: mscc: Add i2c on ocelot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ocelot has an i2c controller, add it. There is only one possible pinmux
configuration so add it as well.

Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
 arch/mips/boot/dts/mscc/ocelot.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 4f33dbc67348..8b6398e09bb6 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi
@@ -78,6 +78,20 @@
 			status = "disabled";
 		};
 
+		i2c: i2c@100400 {
+			compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
+			pinctrl-0 = <&i2c_pins>;
+			pinctrl-names = "default";
+			reg = <0x100400 0x100>, <0x198 0x8>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <8>;
+			i2c-sda-hold-time-ns = <300>;
+			clocks = <&ahb_clk>;
+
+			status = "disabled";
+		};
+
 		uart2: serial@100800 {
 			pinctrl-0 = <&uart2_pins>;
 			pinctrl-names = "default";
@@ -178,6 +192,11 @@
 				pins = "GPIO_12", "GPIO_13";
 				function = "uart2";
 			};
+
+			i2c_pins: i2c-pins {
+				pins = "GPIO_16", "GPIO_17";
+				function = "twi";
+			};
 		};
 
 		mdio0: mdio@107009c {
-- 
2.18.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux