On Fri, Jul 13, 2018 at 12:04 AM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: > Hi everyone, > > This series enables the AXP805 PMIC found on the Pine64 Pine H64 board. > The AXP805 seems to be identical to the AXP806 when comparing datasheets. > The Pine H64 uses the PMIC in stand-alone or "self-working" mode, using > the I2C interface. Neither features are currently supported. This series > adds support for them, and then adds the PMIC to the device tree. > > Unfortunately, v2 was actually an accidental resend of v1. Apologies to > Lee having to review the same stuff twice. > > Changes since v1: > > - Mentioned "self-working mode" in device tree commit message > - Shortened one line mfd cell into just one line > - Dropped unrelated pinctrl change > - Collected tags from Rob, Icenowy, Lee, and Maxime > > Patch 1 adds a new device tree property to describe the self-working mode > for the AXP806. > > Patch 2 adds support for the newly added property to the driver. > > Patch 3 adds support for the using AXP806 with I2C. > > Patch 4 converts raw clock/reset indices for the H6 R_CCU currently found > in the device tree to macros defined as part of the device tree bindings. > > Patch 5 adds the PMIC and its regulators to the Pine H64 device tree. > > First three patches should go in through Lee's mfd tree. We'll take the > other two through the sunxi tree. Merged the device tree patches. > Please have a look. > > Regards > ChenYu > > Chen-Yu Tsai (4): > dt-bindings: mfd: axp20x: Add "self-working" mode for AXP806 > mfd: axp20x: Add self-working mode support for AXP806 > mfd: axp20x: Support AXP806 in I2C mode > arm64: dts: allwinner: h6: Use macros for R_CCU clock and reset > indices > > Icenowy Zheng (1): > arm64: dts: allwinner: h6: enable AXP805 PMIC on Pine H64 > > .../devicetree/bindings/mfd/axp20x.txt | 7 +- > .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 109 ++++++++++++++++++ > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 +- > drivers/mfd/axp20x-i2c.c | 2 + > drivers/mfd/axp20x.c | 28 ++++- > 5 files changed, 146 insertions(+), 8 deletions(-) > > -- > 2.18.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
