On Mon, 2018-07-16 at 19:02 +0200, Heiko Stuebner wrote: > Hi Enric, Ezequiel, > > Am Samstag, 14. Juli 2018, 19:09:22 CEST schrieb Ezequiel Garcia: > > From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> > > > > The board exposes two types A ports, one is USB 3.0, up to 5.0Gbps and > > another one is USB 2.0 up to 480Mbps. Enable the USB PHYs and the USB > > controllers to enable theses devices. > > > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx> > > Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> > > --- > > Changes from v1: > > * Provide voltage for vcc5v0_host and vcc3v3_pcie regulators > > * Provide vin_supply for vcc5v0_host. > > > > arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 90 +++++++++++++++++++ > > 1 file changed, 90 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts > > index 0d14183dd4a9..6295483b701f 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts > > @@ -58,9 +58,24 @@ > > pinctrl-0 = <&pcie_drv>; > > regulator-boot-on; > > regulator-name = "vcc3v3_pcie"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > vin-supply = <&vcc3v3_sys>; > > }; > > I've split this out into a separate patch, as it isn't part of what > the commit message describes and thus should be separate > and applied both resulting patches for 4.19. > > And also cleaned up a vendor-property that shouldn't be > part of mainline. > Thanks a lot! -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html