address-cells/size-cells is unnecessary for dwmac-sun8i node.
It was in early days, but since a mdio node is used, it could be
removed.
This patch fix the following DT warning:
Warning (avoid_unnecessary_addr_size): /soc/ethernet@1c50000: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 8 --------
arch/arm/boot/dts/sun8i-a83t.dtsi | 2 --
arch/arm/boot/dts/sun8i-r40.dtsi | 2 --
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 2 --
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 --
5 files changed, 16 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index cfe724398a12..5bb3a18cc38d 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -19,8 +19,6 @@ Required properties:
- reset-names: must be "stmmaceth"
- phy-mode: See ethernet.txt
- phy-handle: See ethernet.txt
-- #address-cells: shall be 1
-- #size-cells: shall be 0
- syscon: A phandle to the device containing the EMAC or GMAC clock register
Optional properties:
@@ -86,8 +84,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
@@ -137,8 +133,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
@@ -191,8 +185,6 @@ emac: ethernet@1c0b000 {
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
phy-handle = <&ext_rgmii_phy>;
phy-mode = "rgmii";
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index b047f05e690d..276c99fcfcc8 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -913,8 +913,6 @@
reset-names = "stmmaceth";
clocks = <&ccu 27>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
mdio: mdio {
diff --git a/arch/arm/boot/dts/sun8i-r40.dtsi b/arch/arm/boot/dts/sun8i-r40.dtsi
index cb8932bcef0d..bd369112a400 100644
--- a/arch/arm/boot/dts/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/sun8i-r40.dtsi
@@ -576,8 +576,6 @@
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_GMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
gmac_mdio: mdio {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 90021f38c1ef..f0352b8da19f 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -516,8 +516,6 @@
reset-names = "stmmaceth";
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
- #address-cells = <1>;
- #size-cells = <0>;
status = "disabled";
mdio: mdio {
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
index 91dd5dd9e205..357f6cba00cd 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
@@ -668,8 +668,6 @@
clocks = <&ccu CLK_BUS_EMAC>;
clock-names = "stmmaceth";
status = "disabled";
- #address-cells = <1>;
- #size-cells = <0>;
mdio: mdio {
compatible = "snps,dwmac-mdio";
--
2.16.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
