On Thu, Jul 12, 2018 at 12:05:21PM +0000, Phil Edworthy wrote: > Hi Geert, > > On 11 July 2018 13:39, Geert Uytterhoeven wrote: > > On Wed, Jul 11, 2018 at 2:30 PM Phil Edworthy wrote: > > > The RZ/N1 UART is a modified Synopsys DesignWare UART. > > > The modifications only relate to DMA so you could actually use the > > > controller with the Synopsys compatible string if you are not using > > > DMA, but you should not do so. > > > > > > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx> > > > > Thanks for your patch! > > > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/serial/renesas,rzn1-uart.txt > > > @@ -0,0 +1,10 @@ > > > +Renesas RZ/N1 UART > > > + > > > +This controller is based on the Synopsys DesignWare ABP UART and > > > +inherits all properties defined in snps-dw-apb-uart.txt except for the > > compatible property. > > > + > > > +Required properties: > > > +- compatible : The device specific string followed by the generic RZ/N1 > > string. > > > + Therefore it must be one of: > > > + "renesas,uart-r9a06g032", "renesas,uart-rzn1" > > > > "renesas,r9a06g032-uart", "renesas,rzn1-uart" > > > > > + "renesas,uart-r9a06g033", "renesas,uart-rzn1" > > > > "renesas,r9a06g033-uart", "renesas,rzn1-uart" > I followed the renesas convention of renesas,peripheral-device that is used for > most R-Car drivers, but happy to change. Please do. The "Renesas convention" is a hold over from early work on DT bindings. The format Geert describes is now preferred. > > I assume you plan to describe the DMA-related properties later? > Yes, it will take a while to sort out. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
