Hi,
Am Donnerstag, 12. Juli 2018, 18:00:08 CEST schrieb Ezequiel Garcia:
> From: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
>
> The board exposes two types A ports, one is USB 3.0, up to 5.0Gbps and
> another one is USB 2.0 up to 480Mbps. Enable the USB PHYs and the USB
> controllers to enable theses devices.
>
> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
> ---
> Heiko,
>
> Enric finally had some time to take a look at the schematics,
> and help with the USB stuff. Thanks to him, USB host
> is working now! \o/
great to hear that
One issue below though.
> USB Type-C will have to wait until we have some spare time
> to debug the fusb302 driver.
>
> arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 85 +++++++++++++++++++
> 1 file changed, 85 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
> index 0d14183dd4a9..d0631c02749c 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
> @@ -61,6 +61,16 @@
> vin-supply = <&vcc3v3_sys>;
> };
>
> + vcc5v0_host: vcc5v0-host-regulator {
> + compatible = "regulator-fixed";
> + enable-active-high;
> + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&host_vbus_drv>;
> + regulator-name = "vcc5v0_host";
> + regulator-always-on;
missing voltages and also a vin-supply.
These 5V don't come from thin air ;-) and I really like
seeing sane regulator trees.
Thanks
Heiko
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
