This patch set adds pinmux and GPIO controller for the Nuvoton NPCM750/730/715/705 Baseboard Management Controller (BMC). The Nuvoton BMC NPCM750/730/715/705 Pinmux functions accessible only for pin groups and pinconf parameters available only for individual pins. The Nuvoton BMC NPCM750/730/715/705 has eight identical GPIO modules, each module has 32 GPIO ports. Most of the GPIO ports are multiplexed with other system functions. The NPCM7xx pinctrl and GPIO driver tested on NPCM750 evaluation board. Addressed comments from:. - Rob Herring: https://www.spinics.net/lists/kernel/msg2853083.html Changes since version 1: - Remove Kconfig MFD_SYSCON dependency. - Modify setfunc function. - Modify dt-binding documentation according Rob comments. Tomer Maimon (2): dt-binding: pinctrl: Add NPCM7xx pinctrl and GPIO documentation pinctrl: nuvoton: add NPCM7xx pinctrl and GPIO driver .../bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt | 216 ++ drivers/pinctrl/Kconfig | 1 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/nuvoton/Kconfig | 12 + drivers/pinctrl/nuvoton/Makefile | 4 + drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c | 2089 ++++++++++++++++++++ 6 files changed, 2323 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,npcm7xx-pinctrl.txt create mode 100644 drivers/pinctrl/nuvoton/Kconfig create mode 100644 drivers/pinctrl/nuvoton/Makefile create mode 100644 drivers/pinctrl/nuvoton/pinctrl-npcm7xx.c -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
