> Op 12 jul. 2018, om 05:08 heeft Robert Nelson <robertcnelson@xxxxxxxxx> het volgende geschreven: > > On Wed, Jul 11, 2018 at 8:31 AM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: >> * Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx> [180711 07:36]: >>> +&cpu0_opp_table { >>> + /* >>> + * All PG 2.0 silicon may not support 1GHz but some of the early >>> + * BeagleBone Blacks have PG 2.0 silicon which is guaranteed >>> + * to support 1GHz OPP so enable it for PG 2.0 on this board. >>> + */ >>> + oppnitro-1000000000 { >>> + opp-supported-hw = <0x06 0x0100>; >>> + }; >>> +}; >> >> Is the above valid for new boards or should it be just >> dropped? Or is the comment just out of date? > > For SanCloud, this can be dropped, they got normal 1Ghz parts from TI. > > and they aren't using the Octavo SIP which didn't have the 1Ghz efuse set.. > > So just the normal am335x errata, nothing special required in it’s dts... Thanks for the info! I’ll send a v3 with that bit removed shortly after I figure out what trips up kbuild. regards, Koen-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html