The following patches add dts and sysconfig support
for MCAN on TI's dra76 SOCs
Changes in v5:
Return from sysc_reset() with error if syss_mask is not
present. That is the only supported way of reset
Changes in v4:
1. Rebased to latest kernel
2. Using ddata->cfg.syss_mask instead of ddata->cfg.quirks
for checking if poll on reset status is required.
Changes in v3:
1. Added reset functionality to the ti-sysc
driver. This enables me to drop the hwmod
data patch as everything is being done in dt.
2. Dropped ti,hwmods from the dts nodes
3. Fixed the unit address of target-module
and mcan
4. Removed the status="disabled" in dtsi
followed by status="okay" in dts.
Changes in v2:
1. Added Support for mcan in the ti-sysc driver
Also added the target-module node for the same
2. Added clkctrl data for mcan clocks
Faiz Abbas (5):
clk: ti: dra7: Add clkctrl clock data for the mcan clocks
bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
bus: ti-sysc: Add support for software reset
ARM: dts: Add generic interconnect target module node for MCAN
ARM: dts: dra76x: Add MCAN node
Lokesh Vutla (1):
ARM: dts: dra762: Add MCAN clock support
.../devicetree/bindings/bus/ti-sysc.txt | 1 +
arch/arm/boot/dts/dra76-evm.dts | 6 ++
arch/arm/boot/dts/dra76x.dtsi | 64 +++++++++++++++++++
drivers/bus/ti-sysc.c | 62 ++++++++++++++++++
drivers/clk/ti/clk-7xx.c | 1 +
include/dt-bindings/bus/ti-sysc.h | 2 +
include/dt-bindings/clock/dra7.h | 1 +
include/linux/platform_data/ti-sysc.h | 1 +
8 files changed, 138 insertions(+)
--
2.17.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
