On Fri, Jul 06, 2018 at 08:00:51PM +0000, Neeraj Dantu wrote:
> +&lcdc {
> + status = "okay";
> +
> + /* If you want to get 24 bit RGB and 16 BGR mode instead of
> + * current 16 bit RGB and 24 BGR modes, set the propety
> + * below to "crossed" and uncomment the video-ports -property
> + * in tda19988 node.
> + */
> + blue-and-red-wiring = "straight";
...
> +&i2c0 {
> + tda19988: tda19988 {
This should not be "tda19988" as the node name - DT requires generic
names, like "hdmi-encoder".
...
> + /* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
> + /* video-ports = <0x234501>; */
Please explain more what's going on here.
Can you set 24-bit RGB mode with the above configuration - presumably
the colours will come out wrong?
Exactly what is the wiring between the lcdc and tda998x?
--
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 13.8Mbps down 630kbps up
According to speedtest.net: 13Mbps down 490kbps up
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
