Add binding info for peripherals that support dual-channel DSI. Add
corresponding optional bindings for DSI host controllers that may
be configured in this mode. Add an example of an I2C controlled
device operating in dual-channel DSI mode.
Reviewed-by: Philippe Cornu <philippe.cornu@xxxxxx>
Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>
Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/display/mipi-dsi-bus.txt | 80 ++++++++++++++++++++++
1 file changed, 80 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
index b7c5bf47403c..a336599f6c03 100644
--- a/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
+++ b/Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
@@ -29,6 +29,13 @@ Required properties:
- #size-cells: Should be 0. There are cases where it makes sense to use a
different value here. See below.
+Optional properties:
+- clock-master: boolean. Should be enabled if the host is being used in
+ conjunction with another DSI host to drive the same peripheral. Hardware
+ supporting such a configuration generally requires the data on both the busses
+ to be driven by the same clock. Only the DSI host instance controlling this
+ clock should contain this property.
+
DSI peripheral
==============
@@ -62,6 +69,16 @@ primary control bus, but are also connected to a DSI bus (mostly for the data
path). Connections between such peripherals and a DSI host can be represented
using the graph bindings [1], [2].
+Peripherals that support dual channel DSI
+-----------------------------------------
+
+Peripherals with higher bandwidth requirements can be connected to 2 DSI
+busses. Each DSI bus/channel drives some portion of the pixel data (generally
+left/right half of each line of the display, or even/odd lines of the display).
+The graph bindings should be used to represent the multiple DSI busses that are
+connected to this peripheral. Each DSI host's output endpoint can be linked to
+an input endpoint of the DSI peripheral.
+
[1] Documentation/devicetree/bindings/graph.txt
[2] Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -71,6 +88,8 @@ Examples
with different virtual channel configurations.
- (4) is an example of a peripheral on a I2C control bus connected to a
DSI host using of-graph bindings.
+- (5) is an example of 2 DSI hosts driving a dual-channel DSI peripheral,
+ which uses I2C as its primary control bus.
1)
dsi-host {
@@ -153,3 +172,64 @@ Examples
};
};
};
+
+5)
+ i2c-host {
+ dsi-bridge@35 {
+ compatible = "...";
+ reg = <0x35>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dsi0_in: endpoint {
+ remote-endpoint = <&dsi0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dsi1_in: endpoint {
+ remote-endpoint = <&dsi1_out>;
+ };
+ };
+ };
+ };
+ };
+
+ dsi0-host {
+ ...
+
+ /*
+ * this DSI instance drives the clock for both the host
+ * controllers
+ */
+ clock-master;
+
+ ports {
+ ...
+
+ port {
+ dsi0_out: endpoint {
+ remote-endpoint = <&dsi0_in>;
+ };
+ };
+ };
+ };
+
+ dsi1-host {
+ ...
+
+ ports {
+ ...
+
+ port {
+ dsi1_out: endpoint {
+ remote-endpoint = <&dsi1_in>;
+ };
+ };
+ };
+ };
--
2.16.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
