On Fri, Jul 6, 2018 at 11:37 PM, Icenowy Zheng <icenowy@xxxxxxx> wrote:
> Allwinner H6 has two USB2 ports, one OTG and one host-only.
>
> Add device tree nodes related to them.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 90 ++++++++++++++++++++
> 1 file changed, 90 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> index c72da8cd9ef5..62fc0f5e10ba 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
> @@ -174,6 +174,96 @@
> status = "disabled";
> };
>
> + usb2otg: usb@5100000 {
> + compatible = "allwinner,sun8i-a33-musb";
> + reg = <0x05100000 0x0400>;
> + clocks = <&ccu CLK_BUS_OTG>;
> + resets = <&ccu RST_BUS_OTG>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "mc";
> + phys = <&usb2phy 0>;
> + phy-names = "usb";
> + extcon = <&usb2phy 0>;
> + status = "disabled";
> + };
> +
> + usb2phy: phy@5100400 {
> + compatible = "allwinner,sun50i-h6-usb-phy";
> + reg = <0x05100400 0x14>,
> + <0x05101800 0x4>,
> + <0x05311800 0x4>;
> + reg-names = "phy_ctrl",
> + "pmu0",
> + "pmu3";
> + clocks = <&ccu CLK_USB_PHY0>,
> + <&ccu CLK_USB_PHY3>;
> + clock-names = "usb0_phy",
> + "usb3_phy";
> + resets = <&ccu RST_USB_PHY0>,
> + <&ccu RST_USB_PHY3>;
> + reset-names = "usb0_reset",
> + "usb3_reset";
> + status = "disabled";
> + #phy-cells = <1>;
> + };
> +
> + ehci0: usb@5101000 {
> + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> + reg = <0x05101000 0x100>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_BUS_EHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>,
> + <&ccu RST_BUS_EHCI0>;
> + status = "disabled";
> + };
> +
> + ohci0: usb@5101400 {
> + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> + reg = <0x05101400 0x100>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI0>,
> + <&ccu CLK_USB_OHCI0>;
> + resets = <&ccu RST_BUS_OHCI0>;
> + status = "disabled";
> + };
> +
> + usb3phy: phy@5210000 {
Maybe you should split this one out and put it in the USB 3.0 patch?
ChenYu
> + compatible = "allwinner,sun50i-h6-usb3-phy";
> + reg = <0x5210000 0x10000>;
> + clocks = <&ccu CLK_USB_PHY1>;
> + resets = <&ccu RST_USB_PHY1>;
> + #phy-cells = <0>;
> + status = "disabled";
> + };
> +
> + ehci3: usb@5311000 {
> + compatible = "allwinner,sun50i-h6-ehci", "generic-ehci";
> + reg = <0x05311000 0x100>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI3>,
> + <&ccu CLK_BUS_EHCI3>,
> + <&ccu CLK_USB_OHCI3>;
> + resets = <&ccu RST_BUS_OHCI3>,
> + <&ccu RST_BUS_EHCI3>;
> + phys = <&usb2phy 3>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> + ohci3: usb@5311400 {
> + compatible = "allwinner,sun50i-h6-ohci", "generic-ohci";
> + reg = <0x05311400 0x100>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&ccu CLK_BUS_OHCI3>,
> + <&ccu CLK_USB_OHCI3>;
> + resets = <&ccu RST_BUS_OHCI3>;
> + phys = <&usb2phy 3>;
> + phy-names = "usb";
> + status = "disabled";
> + };
> +
> r_ccu: clock@7010000 {
> compatible = "allwinner,sun50i-h6-r-ccu";
> reg = <0x07010000 0x400>;
> --
> 2.17.1
>
> --
> You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx.
> For more options, visit https://groups.google.com/d/optout.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
