Hi Tomi,
Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen:
> Add DT binding documentation for DVI Connector.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> Reviewed-by: Archit Taneja <archit@xxxxxx>
> ---
> .../devicetree/bindings/video/dvi-connector.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/dvi-connector.txt
>
> diff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt
> new file mode 100644
> index 000000000000..6a0aff866c78
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/dvi-connector.txt
> @@ -0,0 +1,26 @@
> +DVI Connector
> +==============
> +
> +Required properties:
> +- compatible: "dvi-connector"
> +
> +Optional properties:
> +- label: a symbolic name for the connector
> +- i2c-bus: phandle to the i2c bus that is connected to DVI DDC
For the i.MX bindings I had called this property 'ddc', but
Documentation/devicetree/bindings/panel/simple-panel.txt already
uses 'ddc-i2c-bus'. We should definitely standardize this.
> +Required nodes:
> +- Video port for DVI input
> +
> +Example
> +-------
> +
> +dvi0: connector@0 {
> + compatible = "dvi-connector";
> + label = "dvi";
> +
> + i2c-bus = <&i2c3>;
> +
> + dvi_connector_in: endpoint {
> + remote-endpoint = <&tfp410_out>;
> + };
> +};
regards
Philipp
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
