On 04/07/2018 16:50, Stanley Chu wrote:
> This patch adds a new "System Timer" on the Mediatek SoCs.
>
> The System Timer is introduced as an always-on timer being
> clockevent device for tick-broadcasting.
>
> For clock, it is driven by 13 MHz system clock.
> The implementation uses the system clock with no clock
> source divider.
>
> For interrupt, the clock event timer can be used by all cores.
>
> Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
> ---
> drivers/clocksource/timer-mediatek.c | 110 +++++++++++++++++++++++++++++++++-
> 1 file changed, 109 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clocksource/timer-mediatek.c b/drivers/clocksource/timer-mediatek.c
> index e57c4d7..e98244a 100644
> --- a/drivers/clocksource/timer-mediatek.c
> +++ b/drivers/clocksource/timer-mediatek.c
> @@ -58,6 +58,86 @@
>
> static void __iomem *gpt_sched_reg __read_mostly;
>
> +/* system timer */
> +#define SYST_BASE (0x40)
> +
> +#define SYST_CON (SYST_BASE + 0x0)
> +#define SYST_VAL (SYST_BASE + 0x4)
> +
> +#define SYST_CON_REG(to) (timer_of_base(to) + SYST_CON)
> +#define SYST_VAL_REG(to) (timer_of_base(to) + SYST_VAL)
> +
> +/*
> + * SYST_CON_EN: Clock enable. Shall be set to
> + * - Start timer countdown.
> + * - Allow timeout ticks being updated.
> + * - Allow changing interrupt functions.
> + *
> + * SYST_CON_IRQ_EN: Set to allow interrupt.
> + *
> + * SYST_CON_IRQ_CLR: Set to clear interrupt.
> + */
> +#define SYST_CON_EN BIT(0)
> +#define SYST_CON_IRQ_EN BIT(1)
> +#define SYST_CON_IRQ_CLR BIT(4)
> +
> +static void __iomem *gpt_sched_reg __read_mostly;
duplicate 'gpt_sched_reg' variable.
> +static void mtk_syst_ack_irq(struct timer_of *to)
> +{
> + /* Clear and disable interrupt */
> + writel(SYST_CON_IRQ_CLR | SYST_CON_EN, SYST_CON_REG(to));
> +}
> +
> +static irqreturn_t mtk_syst_handler(int irq, void *dev_id)
> +{
> + struct clock_event_device *clkevt = dev_id;
> + struct timer_of *to = to_timer_of(clkevt);
> +
> + mtk_syst_ack_irq(to);
> + clkevt->event_handler(clkevt);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mtk_syst_clkevt_next_event(unsigned long ticks,
> + struct clock_event_device *clkevt)
> +{
> + struct timer_of *to = to_timer_of(clkevt);
> +
> + /* Enable clock to allow timeout tick update later */
> + writel(SYST_CON_EN, SYST_CON_REG(to));
> +
> + /*
> + * Write new timeout ticks. Timer shall start countdown
> + * after timeout ticks are updated.
> + */
> + writel(ticks, SYST_VAL_REG(to));
> +
> + /* Enable interrupt */
> + writel(SYST_CON_EN | SYST_CON_IRQ_EN, SYST_CON_REG(to));
> +
> + return 0;
> +}
> +
> +static int mtk_syst_clkevt_shutdown(struct clock_event_device *clkevt)
> +{
> + /* Disable timer */
> + writel(0, SYST_CON_REG(to_timer_of(clkevt)));
> +
> + return 0;
> +}
> +
> +static int mtk_syst_clkevt_resume(struct clock_event_device *clkevt)
> +{
> + return mtk_syst_clkevt_shutdown(clkevt);
> +}
> +
> +static int mtk_syst_clkevt_oneshot(struct clock_event_device *clkevt)
> +{
> + return 0;
> +}
> +
> static u64 notrace mtk_gpt_read_sched_clock(void)
> {
> return readl_relaxed(gpt_sched_reg);
> @@ -186,6 +266,34 @@ static void mtk_gpt_enable_irq(struct timer_of *to, u8 timer)
> },
> };
>
> +static int __init mtk_syst_init(struct device_node *node)
> +{
> + int ret;
> +
> + to.clkevt.features = CLOCK_EVT_FEAT_DYNIRQ | CLOCK_EVT_FEAT_ONESHOT;
> + to.clkevt.set_state_shutdown = mtk_syst_clkevt_shutdown;
> + to.clkevt.set_state_oneshot = mtk_syst_clkevt_oneshot;
> + to.clkevt.tick_resume = mtk_syst_clkevt_resume;
> + to.clkevt.set_next_event = mtk_syst_clkevt_next_event;
> + to.of_irq.handler = mtk_syst_handler;
> +
> + ret = timer_of_init(node, &to);
> + if (ret)
> + goto err;
> +
> + clockevents_config_and_register(&to.clkevt, timer_of_rate(&to),
> + TIMER_SYNC_TICKS, 0xffffffff);
> +
> + pr_info("irq=%d, rate=%lu, max_ns: %llu, min_ns: %llu\n",
> + timer_of_irq(&to), timer_of_rate(&to),
> + to.clkevt.max_delta_ns, to.clkevt.min_delta_ns);
Please remove this trace. Most of this information is already available
in /proc/timer_list.
However, if you think it is worth to add this trace, do a proposition in
the time framework directly so all drivers can benefit this change.
> + return 0;
> +err:
> + timer_of_cleanup(&to);
> + return ret;
> +}
> +
> static int __init mtk_gpt_init(struct device_node *node)
> {
> int ret;
> @@ -218,9 +326,9 @@ static int __init mtk_gpt_init(struct device_node *node)
> mtk_gpt_enable_irq(&to, TIMER_CLK_EVT);
>
> return 0;
> -
> err:
> timer_of_cleanup(&to);
> return ret;
> }
> TIMER_OF_DECLARE(mtk_mt6577, "mediatek,mt6577-timer", mtk_gpt_init);
> +TIMER_OF_DECLARE(mtk_mt6765, "mediatek,mt6765-timer", mtk_syst_init);
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
