Hi Thierry, Hi Miquel, On 25.06.2018 14:34, Miquel Raynal wrote: > Hi Stefan, > > On Sun, 24 Jun 2018 23:27:21 +0200, Stefan Agner <stefan@xxxxxxxx> > wrote: > >> Eigth and hopefully final revision gets rid of nand_release() as >> suggested by Boris. >> >> -- >> Stefan >> >> Changes since v1: >> - Split controller and NAND chip structure >> - Add BCH support >> - Allow to select algorithm and strength using device tree >> - Improve HW ECC error reporting and use DEC_STATUS_BUF only >> - Use SPDX license identifier >> - Use per algorithm mtd_ooblayout_ops >> - Use setup_data_interface callback for NAND timing configuration >> >> Changes since v2: >> - Set clock rate using assigned-clocks >> - Use BIT() macro >> - Fix and improve timing calculation >> - Improve ECC error handling >> - Store OOB layout for tag area in Tegra chip structure >> - Update/fix bindings >> - Use more specific variable names (replace "value") >> - Introduce nand-is-boot-medium >> - Choose sensible ECC strenght automatically >> - Use wait_for_completion_timeout >> - Print register dump on completion timeout >> - Unify tegra_nand_(read|write)_page in tegra_nand_page_xfer >> >> Changes since v3: >> - Implement tegra_nand_(read|write)_raw using DMA >> - Implement tegra_nand_(read|write)_oob using DMA >> - Name registers according to Tegra 2 Technical Reference Manual (v02p) >> - Use wait_for_completion_io_timeout to account for IO >> - Get chip select id from device tree reg property >> - Clear interrupts and reinit wait queues in case command/DMA times out >> - Set default MTD name after nand_set_flash_node >> - Move MODULE_DEVICE_TABLE after declaration of tegra_nand_of_match >> - Make (rs|bch)_strength static >> >> Changes since v4: >> - Pass OOB area to nand_check_erased_ecc_chunk >> - Pass algorithm specific bits_per_step to tegra_nand_get_strength >> - Store ECC layout in chip structure >> - Fix pointer assignment (use NULL) >> - Removed obsolete header delay.h >> - Fixed newlines >> - Use non-_io variant of wait_for_completion_timeout >> >> Changes since v5: >> - Drop extra OOB bytes support >> >> Changes since v6: >> - checkpatch.pl fixes >> >> Changes since v7: >> - Replace nand_release() with mtd_device_unregister() + nand_cleanup() >> >> Lucas Stach (1): >> ARM: dts: tegra: add Tegra20 NAND flash controller node >> >> Stefan Agner (5): >> mtd: rawnand: add Reed-Solomon error correction algorithm >> mtd: rawnand: add an option to specify NAND chip as a boot device >> mtd: rawnand: tegra: add devicetree binding >> mtd: rawnand: add NVIDIA Tegra NAND Flash controller driver >> ARM: dts: tegra: enable NAND flash on Colibri T20 >> >> .../devicetree/bindings/mtd/nand.txt | 6 +- >> .../bindings/mtd/nvidia-tegra20-nand.txt | 64 + >> MAINTAINERS | 7 + >> arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 + >> arch/arm/boot/dts/tegra20.dtsi | 15 + >> drivers/mtd/nand/raw/Kconfig | 10 + >> drivers/mtd/nand/raw/Makefile | 1 + >> drivers/mtd/nand/raw/nand_base.c | 4 + >> drivers/mtd/nand/raw/tegra_nand.c | 1230 +++++++++++++++++ >> include/linux/mtd/rawnand.h | 7 + >> 10 files changed, 1359 insertions(+), 1 deletion(-) >> create mode 100644 Documentation/devicetree/bindings/mtd/nvidia-tegra20-nand.txt >> create mode 100644 drivers/mtd/nand/raw/tegra_nand.c >> > > Series applied to nand/next. I just changed the subject of patch3/6 to > be "dt-bindings: mtd: add tegra NAND controller binding". > It seems "series applied" refers to the MTD part... I guess patch 5 and 6 have to go through Tegra tree, Thierry? -- Stefan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
