Re: [PATCH 12/25] dt-bindings: PCI: qcom,ar7240: adds binding doc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 25, 2018 at 07:15:36PM +0200, John Crispin wrote:
> With the driver being converted from platform_data to pure OF, we need to
> also add some docs.
> 
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Signed-off-by: John Crispin <john@xxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pci/qcom,ar7240-pci.txt    | 40 ++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
> new file mode 100644
> index 000000000000..7f6ca8a0f859
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,ar7240-pci.txt
> @@ -0,0 +1,40 @@
> +* Qualcomm Atheros AR724X PCI express root complex
> +
> +Required properties:
> +- compatible: should contain "qcom,ar7240-pci" to identify the core.
> +- reg: Should contain the register ranges as listed in the reg-names property.
> +- reg-names: Definition: Must include the following entries
> +	- "crp_base"	Configuration registers
> +	- "ctrl_base"	Control registers
> +	- "cfg_base"	IO Memory

IO or config space? IO space goes in ranges and config space goes 
in reg.

Same comments as 7100 below.

> +- #address-cells: set to <3>
> +- #size-cells: set to <2>
> +- ranges: ranges for the PCI memory and I/O regions
> +- interrupt-map-mask and interrupt-map: standard PCI
> +	properties to define the mapping of the PCIe interface to interrupt
> +	numbers.
> +- #interrupt-cells: set to <1>
> +- interrupt-parent: phandle to the MIPS IRQ controller
> +- interrupt-controller: define to enable the builtin IRQ cascade.
> +
> +* Example for qca9557
> +	pcie0: pcie-controller@180c0000 {
> +		compatible = "qcom,ar7240-pci";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		bus-range = <0x0 0x0>;
> +		reg = <0x180c0000 0x1000>,
> +		      <0x180f0000 0x100>,
> +		      <0x14000000 0x1000>;
> +		reg-names = "crp_base", "ctrl_base", "cfg_base";
> +		ranges = <0x2000000 0 0x10000000 0x10000000 0 0x04000000
> +			  0x1000000 0 0x00000000 0x00000000 0 0x00000001>;
> +		interrupt-parent = <&intc2>;
> +		interrupts = <1>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <1>;
> +
> +		interrupt-map-mask = <0 0 0 1>;
> +		interrupt-map = <0 0 0 0 &pcie0 0>;
> +	};
> -- 
> 2.11.0
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux