Re: [PATCH 4/5] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andy,

On Tue, Feb 25, 2014 at 01:28:15PM +0200, Andy Shevchenko wrote:
> > +static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
> > +{
> > +	struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)dev_id;
> > +	struct sun6i_vchan *vchan;
> > +	struct sun6i_pchan *pchan;
> > +	int i, j, ret = 0;
> > +	u32 status;
> > +
> > +	for (i = 0; i < 2; i++) {
> > +		status = readl(sdev->base + DMA_IRQ_STAT(i));
> > +		if (!status) {
> > +			ret |= IRQ_NONE;
> 
> Maybe move this to definition block.
> 
> > +			continue;
> > +		}
> > +
> > +		dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n",
> > +			i ? "high" : "low", status);
> > +
> > +		writel(status, sdev->base + DMA_IRQ_STAT(i));
> > +
> > +		for (j = 0; (j < 8) && status; j++) {
> > +			if (status & DMA_IRQ_QUEUE) {
> > +				pchan = sdev->pchans + j;
> > +				vchan = pchan->vchan;
> > +
> > +				if (vchan) {
> > +					unsigned long flags;
> > +
> > +					spin_lock_irqsave(&vchan->vc.lock,
> > +							  flags);
> > +					vchan_cookie_complete(&pchan->desc->vd);
> > +					pchan->done = pchan->desc;
> > +					spin_unlock_irqrestore(&vchan->vc.lock,
> > +							       flags);
> > +				}
> > +			}
> > +
> > +			status = status >> 4;
> > +		}
> > +
> > +		ret |= IRQ_HANDLED;
> 
> In case one is handled, another is not, what you have to do?

The interrupt status is split across two registers. In the case where
one of the two register reports an interrupt, we still have to handle
our interrupt, we actually did, so we have to return IRQ_HANDLED.

[ ... ]

> > +static int sun6i_dma_probe(struct platform_device *pdev)
> > +{
> > +	struct sun6i_dma_dev *sdc;
> > +	struct resource *res;
> > +	int irq;
> > +	int ret, i;
> > +
> > +	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
> > +	if (!sdc)
> > +		return -ENOMEM;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	sdc->base = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(sdc->base))
> > +		return PTR_ERR(sdc->base);
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	ret = devm_request_irq(&pdev->dev, irq, sun6i_dma_interrupt, 0,
> > +			       dev_name(&pdev->dev), sdc);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Cannot request IRQ\n");
> > +		return ret;
> > +	}
> > +
> > +	sdc->clk = devm_clk_get(&pdev->dev, NULL);
> > +	if (IS_ERR(sdc->clk)) {
> > +		dev_err(&pdev->dev, "No clock specified\n");
> > +		return PTR_ERR(sdc->clk);
> > +	}
> > +
> > +	sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
> > +	if (IS_ERR(sdc->rstc)) {
> > +		dev_err(&pdev->dev, "No reset controller specified\n");
> > +		return PTR_ERR(sdc->rstc);
> > +	}
> > +
> > +	sdc->pool = dma_pool_create(dev_name(&pdev->dev), &pdev->dev,
> > +					sizeof(struct sun6i_dma_lli), 4, 0);
> 
> dmam_pool_create()

Aaah. I looked for a devm_dma_pool_create, but I missed this one.

> 
> > +	if (!sdc->pool) {
> > +		dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
> > +		return -ENOMEM;
> > +	}
> > +
> > +	platform_set_drvdata(pdev, sdc);
> > +	INIT_LIST_HEAD(&sdc->pending);
> > +	spin_lock_init(&sdc->lock);
> > +
> > +	dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
> > +	dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
> > +	dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
> > +
> > +	INIT_LIST_HEAD(&sdc->slave.channels);
> > +	sdc->slave.device_alloc_chan_resources	= sun6i_dma_alloc_chan_resources;
> > +	sdc->slave.device_free_chan_resources	= sun6i_dma_free_chan_resources;
> > +	sdc->slave.device_tx_status		= sun6i_dma_tx_status;
> > +	sdc->slave.device_issue_pending		= sun6i_dma_issue_pending;
> > +	sdc->slave.device_prep_slave_sg		= sun6i_dma_prep_slave_sg;
> > +	sdc->slave.device_prep_dma_memcpy	= sun6i_dma_prep_dma_memcpy;
> > +	sdc->slave.device_control		= sun6i_dma_control;
> > +	sdc->slave.chancnt			= NR_MAX_VCHANS;
> > +
> > +	sdc->slave.dev = &pdev->dev;
> > +
> > +	sdc->pchans = devm_kzalloc(&pdev->dev,
> > +				   NR_MAX_CHANNELS * sizeof(struct sun6i_pchan),
> > +				   GFP_KERNEL);
> > +	if (!sdc->pchans) {
> > +		ret = -ENOMEM;
> > +		goto err_dma_pool_destroy;
> > +	}
> > +
> > +	sdc->vchans = devm_kzalloc(&pdev->dev,
> > +				   NR_MAX_VCHANS * sizeof(struct sun6i_vchan),
> > +				   GFP_KERNEL);
> > +	if (!sdc->vchans) {
> > +		ret = -ENOMEM;
> > +		goto err_dma_pool_destroy;
> > +	}
> > +
> > +	tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc);
> > +
> > +	for (i = 0; i < NR_MAX_CHANNELS; i++) {
> > +		struct sun6i_pchan *pchan = &sdc->pchans[i];
> > +
> > +		pchan->idx = i;
> > +		pchan->base = sdc->base + 0x100 + i * 0x40;
> > +	}
> > +
> > +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> > +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> > +
> > +		INIT_LIST_HEAD(&vchan->node);
> > +		vchan->vc.desc_free = sun6i_dma_free_desc;
> > +		vchan_init(&vchan->vc, &sdc->slave);
> > +	}
> > +
> > +	reset_control_deassert(sdc->rstc);
> > +
> > +	clk_prepare_enable(sdc->clk);
> 
> Would you like to check an return code here?

Yep, right.

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux