On Tue, 2018-07-03 at 14:57 +0000, Yixun Lan wrote:
> Document the EMMC sub clock controller driver, the potential consumer
> of this driver is EMMC or NAND.
>
> Signed-off-by: Yixun Lan <yixun.lan@xxxxxxxxxxx>
> ---
> .../bindings/clock/amlogic,emmc-clkc.txt | 45 +++++++++++++++++++
> 1 file changed, 45 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
> new file mode 100644
> index 000000000000..5534bd446363
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,emmc-clkc.txt
> @@ -0,0 +1,45 @@
> +* Amlogic EMMC Sub Clock Controller Driver
> +
> +The Amlogic EMMC clock controller generates and supplies clock to support
> +EMMC and NAND controller
> +
> +Required Properties:
> +
> +- compatible: should be:
> + "amlogic,emmc-clkc"
missing clocks and clock-names here
> +
> +- #clock-cells: should be 1.
> +
> +Two clocks are provided as the parent of this EMMC clock controller driver from
> +upper layer clock controller - eg "amlogic,axg-clkc" in AXG platfrom.
> +The main consumer of this driver is EMMC or NAND, to specify which the clock
> +they may consume, the preprocessor macros in the dt-bindings/clock/emmc-clkc.h
> +header and can be used in device tree sources.
Not sure this explanation belongs in dt-binding documentation.
Maybe this should be in the driver itself.
> +
> +Parent node should have the following properties :
> +- compatible: "syscon", "simple-mfd, and "amlogic,emmc-clkc"
> +- reg: base address and size of the EMMC control register space.
> +
> +Example: Clock controller node:
> +
> +sd_emmc_c_clkc: clock-controller@7000 {
> + compatible = "amlogic,emmc-clkc", "syscon", "simple-mfd";
> + reg = <0x0 0x7000 0x0 0x4>;
> + #clock-cells = <1>;
> +
> + clock-names = "clkin0", "clkin1";
> + clocks = <&clkc CLKID_SD_EMMC_C_CLK0>,
> + <&clkc CLKID_FCLK_DIV2>;
> +};
> +
Not sure the following is necessary, you don't really to show how to use a clock
controller.
> +Example: NAND controller node that consumes the clock generated by the clock
> + controller:
> +
> + nand: nfc@7800 {
> + compatible = "amlogic,meson-axg-nfc";
> + reg = <0x0 0x7800 0x0 0x100>;
> + interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&clkc CLKID_SD_EMMC_C>,
> + <&sd_emmc_c_clkc CLKID_EMMC_C_DIV>;
> + clock-names = "core", "device";
> + };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
