Re: [PATCH v2 1/3] arm64: dts: actions: Enable clock controller for S700

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jun 28, 2018 at 09:18:03PM +0200, Saravanan Sekar wrote:
> Added clock management controller for S700
> 
> Signed-off-by: Parthiban Nallathambi <pn@xxxxxxx>
> Signed-off-by: Saravanan Sekar <sravanhome@xxxxxxxxx>
> ---
>  .../boot/dts/actions/s700-cubieboard7.dts     |   7 -
>  arch/arm64/boot/dts/actions/s700.dtsi         |   8 ++
>  include/dt-bindings/clock/actions,s700-cmu.h  | 128 ++++++++++++++++++
>  3 files changed, 136 insertions(+), 7 deletions(-)
>  create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
> 
> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> index ef79d7905f44..28f3f4a0f7f0 100644
> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
> @@ -28,12 +28,6 @@
>  		device_type = "memory";
>  		reg = <0x1 0xe0000000 0x0 0x0>;
>  	};
> -
> -	uart3_clk: uart3-clk {
> -		compatible = "fixed-clock";
> -		clock-frequency = <921600>;
> -		#clock-cells = <0>;
> -	};

Sourcing CMU clock for UART should be in a separate patch.

>  };
>  
>  &timer {
> @@ -42,5 +36,4 @@
>  
>  &uart3 {
>  	status = "okay";
> -	clocks = <&uart3_clk>;
>  };
> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
> index 66dd5309f0a2..3530b705df90 100644
> --- a/arch/arm64/boot/dts/actions/s700.dtsi
> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
> @@ -4,6 +4,7 @@
>   */
>  
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/actions,s700-cmu.h>
>  
>  / {
>  	compatible = "actions,s700";
> @@ -44,6 +45,12 @@
>  		};
>  	};
>  
> +	clock: clock-controller@e0168000 {
> +		compatible = "actions,s700-cmu";
> +		reg = <0 0xe0168000 0 0x1000>;
> +		#clock-cells = <1>;
> +	};
> +

There is no fixed rate clock like losc?

>  	reserved-memory {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -129,6 +136,7 @@
>  			compatible = "actions,s900-uart", "actions,owl-uart";
>  			reg = <0x0 0xe0126000 0x0 0x2000>;
>  			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clock CLK_UART3>;
>  			status = "disabled";
>  		};
>  
> diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h
> new file mode 100644
> index 000000000000..e5b4ea130953
> --- /dev/null
> +++ b/include/dt-bindings/clock/actions,s700-cmu.h
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Actions S700 clock driver
> + *
> + * Copyright (c) 2014 Actions Semi Inc.
> + * Author: David Liu <liuwei@xxxxxxxxxxxxxxxx>
> + *
> + * Author: Pathiban Nallathambi <pn@xxxxxxx>
> + * Author: Saravanan Sekar <sravanhome@xxxxxxxxx>
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_S700_H
> +#define __DT_BINDINGS_CLOCK_S700_H
> +
> +#define CLK_NONE			0
> +
> +/* fixed rate clocks */
> +#define CLK_LOSC			1
> +#define CLK_HOSC			2
> +
> +/* pll clocks */
> +#define CLK_CORE_PLL			3
> +#define CLK_DEV_PLL			4
> +#define CLK_DDR_PLL			5
> +#define CLK_NAND_PLL			6
> +#define CLK_DISPLAY_PLL			7
> +#define CLK_TVOUT_PLL			8
> +#define CLK_CVBS_PLL			9
> +#define CLK_AUDIO_PLL			10
> +#define CLK_ETHERNET_PLL		11
> +

Remove extra new line please.

> +
> +/* system clock */
> +#define CLK_SYS_BASE			12
> +#define CLK_CPU				CLK_SYS_BASE
> +#define CLK_DEV				(CLK_SYS_BASE+1)
> +#define CLK_AHB				(CLK_SYS_BASE+2)
> +#define CLK_APB				(CLK_SYS_BASE+3)
> +#define CLK_DMAC			(CLK_SYS_BASE+4)
> +#define CLK_NOC0_CLK_MUX		(CLK_SYS_BASE+5)
> +#define CLK_NOC1_CLK_MUX		(CLK_SYS_BASE+6)
> +#define CLK_HP_CLK_MUX			(CLK_SYS_BASE+7)
> +#define CLK_HP_CLK_DIV			(CLK_SYS_BASE+8)
> +#define CLK_NOC1_CLK_DIV		(CLK_SYS_BASE+9)
> +#define CLK_NOC0			(CLK_SYS_BASE+10)
> +#define CLK_NOC1			(CLK_SYS_BASE+11)
> +#define CLK_SENOR_SRC			(CLK_SYS_BASE+12)
> +
> +/* peripheral device clock */
> +#define CLK_PERIP_BASE			25
> +#define CLK_GPIO			(CLK_PERIP_BASE)
> +#define CLK_TIMER			(CLK_PERIP_BASE+1)
> +#define CLK_DSI				(CLK_PERIP_BASE+2)
> +#define CLK_CSI				(CLK_PERIP_BASE+3)
> +#define CLK_SI				(CLK_PERIP_BASE+4)
> +#define CLK_DE				(CLK_PERIP_BASE+5)
> +#define CLK_HDE				(CLK_PERIP_BASE+6)
> +#define CLK_VDE				(CLK_PERIP_BASE+7)
> +#define CLK_VCE				(CLK_PERIP_BASE+8)
> +#define CLK_NAND			(CLK_PERIP_BASE+9)
> +#define CLK_SD0				(CLK_PERIP_BASE+10)
> +#define CLK_SD1				(CLK_PERIP_BASE+11)
> +#define CLK_SD2				(CLK_PERIP_BASE+12)
> +
> +#define CLK_UART0			(CLK_PERIP_BASE+13)
> +#define CLK_UART1			(CLK_PERIP_BASE+14)
> +#define CLK_UART2			(CLK_PERIP_BASE+15)
> +#define CLK_UART3			(CLK_PERIP_BASE+16)
> +#define CLK_UART4			(CLK_PERIP_BASE+17)
> +#define CLK_UART5			(CLK_PERIP_BASE+18)
> +#define CLK_UART6			(CLK_PERIP_BASE+19)
> +
> +#define CLK_PWM0			(CLK_PERIP_BASE+20)
> +#define CLK_PWM1			(CLK_PERIP_BASE+21)
> +#define CLK_PWM2			(CLK_PERIP_BASE+22)
> +#define CLK_PWM3			(CLK_PERIP_BASE+23)
> +#define CLK_PWM4			(CLK_PERIP_BASE+24)
> +#define CLK_PWM5			(CLK_PERIP_BASE+25)
> +#define CLK_GPU3D			(CLK_PERIP_BASE+26)
> +
> +#define CLK_I2C0			(CLK_PERIP_BASE+27)
> +#define CLK_I2C1			(CLK_PERIP_BASE+28)
> +#define CLK_I2C2			(CLK_PERIP_BASE+29)
> +#define CLK_I2C3			(CLK_PERIP_BASE+30)
> +
> +
> +#define CLK_SPI0			(CLK_PERIP_BASE+31)
> +#define CLK_SPI1			(CLK_PERIP_BASE+32)
> +#define CLK_SPI2			(CLK_PERIP_BASE+33)
> +#define CLK_SPI3			(CLK_PERIP_BASE+34)
> +
> +#define CLK_USB3_480MPLL0		(CLK_PERIP_BASE+35)
> +#define CLK_USB3_480MPHY0		(CLK_PERIP_BASE+36)
> +#define CLK_USB3_5GPHY			(CLK_PERIP_BASE+37)
> +#define CLK_USB3_CCE			(CLK_PERIP_BASE+48)
> +#define CLK_USB3_MAC			(CLK_PERIP_BASE+49)
> +
> +
> +#define CLK_LCD				(CLK_PERIP_BASE+50)
> +#define CLK_HDMI_AUDIO			(CLK_PERIP_BASE+51)
> +#define CLK_I2SRX			(CLK_PERIP_BASE+52)
> +#define CLK_I2STX			(CLK_PERIP_BASE+53)
> +
> +#define CLK_SENSOR0			(CLK_PERIP_BASE+54)
> +#define CLK_SENSOR1			(CLK_PERIP_BASE+55)
> +
> +#define CLK_HDMI_DEV			(CLK_PERIP_BASE+56)
> +
> +#define CLK_ETHERNET			(CLK_PERIP_BASE+59)
> +#define CLK_RMII_REF			(CLK_PERIP_BASE+60)
> +
> +#define CLK_USB2H0_PLLEN		(CLK_PERIP_BASE+61)
> +#define CLK_USB2H0_PHY			(CLK_PERIP_BASE+62)
> +#define CLK_USB2H0_CCE			(CLK_PERIP_BASE+63)
> +#define CLK_USB2H1_PLLEN		(CLK_PERIP_BASE+64)
> +#define CLK_USB2H1_PHY			(CLK_PERIP_BASE+65)
> +#define CLK_USB2H1_CCE			(CLK_PERIP_BASE+66)
> +
> +
> +#define CLK_TVOUT			(CLK_PERIP_BASE+67)
> +
> +#define CLK_THERMAL_SENSOR		(CLK_PERIP_BASE+68)
> +
> +#define CLK_IRC_SWITCH			(CLK_PERIP_BASE+69)
> +#define CLK_PCM1			(CLK_PERIP_BASE+70)
> +#define CLK_NR_CLKS			(CLK_PCM1) /* update on adding new clk */
> +

Since the index starts from 0, CLK_NR_CLKS should be CLK_PCM1 + 1

Thanks,
Mani

> +#endif /* __DT_BINDINGS_CLOCK_S700_H */
> -- 
> 2.18.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux