Re: [PATCH v3 06/15] dt: binding: add binding for ImgTec IR block

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Rob, Mark + DT maintainers,

On Friday 07 February 2014 15:49:15 James Hogan wrote:
> Add device tree binding for ImgTec Consumer Infrared block, specifically
> major revision 1 of the hardware.
> 
> Signed-off-by: James Hogan <james.hogan@xxxxxxxxxx>
> Cc: Mauro Carvalho Chehab <m.chehab@xxxxxxxxxxx>
> Cc: linux-media@xxxxxxxxxxxxxxx
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> Cc: Pawel Moll <pawel.moll@xxxxxxx>
> Cc: Mark Rutland <mark.rutland@xxxxxxx>
> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Rob Landley <rob@xxxxxxxxxxx>
> Cc: linux-doc@xxxxxxxxxxxxxxx
> Cc: Tomasz Figa <tomasz.figa@xxxxxxxxx>
> ---
> v3:
> - Rename compatible string to "img,ir-rev1" (Rob Herring).
> - Specify ordering of clocks explicitly (Rob Herring).

I'd appreciate if somebody could give this another glance after the two 
changes listed above and Ack it (I'll probably be posting a v4 patchset 
tomorrow).

Thanks
James

> 
> v2:
> - Future proof compatible string from "img,ir" to "img,ir1", where the 1
>   corresponds to the major revision number of the hardware (Tomasz
>   Figa).
> - Added clock-names property and three specific clock names described in
>   the manual, only one of which is used by the current driver (Tomasz
>   Figa).
> ---
>  .../devicetree/bindings/media/img-ir-rev1.txt      | 34
> ++++++++++++++++++++++ 1 file changed, 34 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/img-ir-rev1.txt
> 
> diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt
> b/Documentation/devicetree/bindings/media/img-ir-rev1.txt new file mode
> 100644
> index 000000000000..5434ce61b925
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt
> @@ -0,0 +1,34 @@
> +* ImgTec Infrared (IR) decoder version 1
> +
> +This binding is for Imagination Technologies' Infrared decoder block,
> +specifically major revision 1.
> +
> +Required properties:
> +- compatible:		Should be "img,ir-rev1"
> +- reg:			Physical base address of the controller and length of
> +			memory mapped region.
> +- interrupts:		The interrupt specifier to the cpu.
> +
> +Optional properties:
> +- clocks:		List of clock specifiers as described in standard
> +			clock bindings.
> +			Up to 3 clocks may be specified in the following order:
> +			1st:	Core clock (defaults to 32.768KHz if omitted).
> +			2nd:	System side (fast) clock.
> +			3rd:	Power modulation clock.
> +- clock-names:		List of clock names corresponding to the clocks
> +			specified in the clocks property.
> +			Accepted clock names are:
> +			"core":	Core clock.
> +			"sys":	System clock.
> +			"mod":	Power modulation clock.
> +
> +Example:
> +
> +	ir@02006200 {
> +		compatible = "img,ir-rev1";
> +		reg = <0x02006200 0x100>;
> +		interrupts = <29 4>;
> +		clocks = <&clk_32khz>;
> +		clock-names =  "core";
> +	};

Attachment: signature.asc
Description: This is a digitally signed message part.


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux