Add support for the Broadcom BCM21664 mobile SoC. It has two Cortex-A9
cores like the BCM281xx family of chips. BCM21664 and BCM281xx share
many IP blocks in addition to the ARM cores.
Signed-off-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
---
arch/arm/mach-bcm/Makefile | 6 ++-
arch/arm/mach-bcm/board_bcm21664.c | 78 ++++++++++++++++++++++++++++++++++++
2 files changed, 82 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/mach-bcm/board_bcm21664.c
diff --git a/arch/arm/mach-bcm/Makefile b/arch/arm/mach-bcm/Makefile
index c2ccd5a..0e2e52e 100644
--- a/arch/arm/mach-bcm/Makefile
+++ b/arch/arm/mach-bcm/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2012-2013 Broadcom Corporation
+# Copyright (C) 2012-2014 Broadcom Corporation
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
@@ -10,6 +10,8 @@
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+obj-$(CONFIG_ARCH_BCM_MOBILE) := board_bcm281xx.o board_bcm21664.o \
+ bcm_kona_smc.o bcm_kona_smc_asm.o kona.o
+
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_bcm_kona_smc_asm.o :=-Wa,-march=armv7-a$(plus_sec)
diff --git a/arch/arm/mach-bcm/board_bcm21664.c b/arch/arm/mach-bcm/board_bcm21664.c
new file mode 100644
index 0000000..d3ef7e5
--- /dev/null
+++ b/arch/arm/mach-bcm/board_bcm21664.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clocksource.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "bcm_kona_smc.h"
+#include "kona.h"
+
+#define RSTMGR_DT_STRING "brcm,bcm21664-resetmgr"
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET 0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4
+
+#define RSTMGR_WR_PASSWORD 0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT 8
+#define RSTMGR_WR_ACCESS_ENABLE 1
+
+static void bcm21644_restart(enum reboot_mode mode, const char *cmd)
+{
+ void __iomem *base;
+ struct device_node *resetmgr;
+
+ resetmgr = of_find_compatible_node(NULL, NULL, RSTMGR_DT_STRING);
+ if (!resetmgr) {
+ pr_emerg("Couldn't find " RSTMGR_DT_STRING "\n");
+ return;
+ }
+ base = of_iomap(resetmgr, 0);
+ if (!base) {
+ pr_emerg("Couldn't map " RSTMGR_DT_STRING "\n");
+ return;
+ }
+
+ /*
+ * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+ * register. To write to that register we must first write the password
+ * and the enable bit in the write access enable register.
+ */
+ writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+ RSTMGR_WR_ACCESS_ENABLE,
+ base + RSTMGR_REG_WR_ACCESS_OFFSET);
+ writel(0, base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+ /* Wait for reset */
+ while (1);
+}
+
+static void __init bcm21644_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL,
+ &platform_bus);
+ kona_l2_cache_init();
+}
+
+static const char * const bcm21664_dt_compat[] = {
+ "brcm,bcm21664",
+ NULL,
+};
+
+DT_MACHINE_START(BCM21664_DT, "BCM21664 Broadcom Application Processor")
+ .init_machine = bcm21644_init,
+ .restart = bcm21644_restart,
+ .dt_compat = bcm21664_dt_compat,
+MACHINE_END
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
