Hi, Lucas Anson Huang Best Regards! > -----Original Message----- > From: Lucas Stach [mailto:l.stach@xxxxxxxxxxxxxx] > Sent: Friday, June 29, 2018 4:15 PM > To: Anson Huang <anson.huang@xxxxxxx>; shawnguo@xxxxxxxxxx; > s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; Fabio Estevam > <fabio.estevam@xxxxxxx>; robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; > linux-kernel@xxxxxxxxxxxxxxx > Cc: dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [PATCH] ARM: dts: imx6: correct anatop regulators range > > Am Freitag, den 29.06.2018, 15:54 +0800 schrieb Anson Huang: > > Correct some i.MX6 SoCs anatop regulators range according to reference > > manual. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > NACK. > > This is wrong. While the regulator supports this range, the SoC doesn't. The > current settings are derived from the allowed operating ranges of the SoC (at > least for the MX6QDL), which is in accordance with how regulator constraints > in DT are meant to be used. Understand that normally these regulators' voltage are NOT adjusted, we just use the default value, let's just call the operating range of the SoC "SoC range", my intention is to make all i.MX6's anatop regulator settings aligned since they are in same series, I saw some i.MX6 SoCs use same SoC range as anatop ldo range, but some are NOT, like imx6qdl/imx6sx/imx6sl use different SoC range than anatop ldo range, but imx6ul/ull/sll use same regulator range as anatop ldo, and regulator 1p1/2p5/3p0 also have different settings, some are use SoC range and some are just same as anatop ldo range....this looks really confused. So, do you think we can adjust the imx6ul/ull/sll's regulator range to be SoC range rather than anatop ldo range? And how to define the SoC range? Like the 1p1 ldo range, how do we know which range is fine? As I saw it is 1v ~ 1.2v on imx6qdl, but 0.8v ~ 1.375v on imx6sl? Thanks. Anson. > > Regards, > Lucas > > > --- > > arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------ > > arch/arm/boot/dts/imx6sl.dtsi | 4 ++-- > > arch/arm/boot/dts/imx6sx.dtsi | 4 ++-- > > 3 files changed, 10 insertions(+), 10 deletions(-) > > > > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi > > b/arch/arm/boot/dts/imx6qdl.dtsi index 911141e..d9f98dd 100644 > > --- a/arch/arm/boot/dts/imx6qdl.dtsi > > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > > @@ -689,8 +689,8 @@ > > > regulator-1p1 { > > > compatible = "fsl,anatop-regulator"; > > > regulator-name = "vdd1p1"; > > > - regulator-min-microvolt = <1000000>; > > > - regulator-max-microvolt = <1200000>; > > > + regulator-min-microvolt = <800000>; > > > + regulator-max-microvolt = <1375000>; > > > regulator-always-on; > > > anatop-reg-offset = <0x110>; > > > anatop-vol-bit-shift = <8>; > > @@ -704,8 +704,8 @@ > > > regulator-3p0 { > > > compatible = "fsl,anatop-regulator"; > > > regulator-name = "vdd3p0"; > > > - regulator-min-microvolt = <2800000>; > > > - regulator-max-microvolt = <3150000>; > > > + regulator-min-microvolt = <2625000>; > > > + regulator-max-microvolt = <3400000>; > > > regulator-always-on; > > > anatop-reg-offset = <0x120>; > > > anatop-vol-bit-shift = <8>; > > @@ -719,8 +719,8 @@ > > > regulator-2p5 { > > > compatible = "fsl,anatop-regulator"; > > > regulator-name = "vdd2p5"; > > > - regulator-min-microvolt = <2250000>; > > > - regulator-max-microvolt = <2750000>; > > > + regulator-min-microvolt = <2100000>; > > > + regulator-max-microvolt = <2875000>; > > > regulator-always-on; > > > anatop-reg-offset = <0x130>; > > > anatop-vol-bit-shift = <8>; > > diff --git a/arch/arm/boot/dts/imx6sl.dtsi > > b/arch/arm/boot/dts/imx6sl.dtsi index 81f48116..3d7931b 100644 > > --- a/arch/arm/boot/dts/imx6sl.dtsi > > +++ b/arch/arm/boot/dts/imx6sl.dtsi > > @@ -539,8 +539,8 @@ > > > regulator-3p0 { > > > compatible = "fsl,anatop-regulator"; > > > regulator-name = "vdd3p0"; > > > - regulator-min-microvolt = <2800000>; > > > - regulator-max-microvolt = <3150000>; > > > + regulator-min-microvolt = <2625000>; > > > + regulator-max-microvolt = <3400000>; > > > regulator-always-on; > > > anatop-reg-offset = <0x120>; > > > anatop-vol-bit-shift = <8>; > > diff --git a/arch/arm/boot/dts/imx6sx.dtsi > > b/arch/arm/boot/dts/imx6sx.dtsi index 7130ab8..f26f611 100644 > > --- a/arch/arm/boot/dts/imx6sx.dtsi > > +++ b/arch/arm/boot/dts/imx6sx.dtsi > > @@ -607,8 +607,8 @@ > > > regulator-3p0 { > > > compatible = "fsl,anatop-regulator"; > > > regulator-name = "vdd3p0"; > > > - regulator-min-microvolt = <2800000>; > > > - regulator-max-microvolt = <3150000>; > > > + regulator-min-microvolt = <2625000>; > > > + regulator-max-microvolt = <3400000>; > > > regulator-always-on; > > > anatop-reg-offset = <0x120>; > > > anatop-vol-bit-shift = <8>; ��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
